Jump to content
SAU Community

Buying Semi-slick Tyres In Brisbane

jmac

By jmac,
in Queensland

 Share

Recommended Posts

jmac Rising Star

jmac

Posted
Posted

Hi guys,

Gonna try to track down some R-compound tyres for the next hillclimb and future trackdays... was just wondering if anyone had any feedback about good/bad places to buy them from in Brisbane?

At this point (after searching) it's coming down to the Dunlop D01J or DZ02G, or Bridgestone RE55, or maybe some Yokos. I know you can pick up the Dunlops from Qld Raceway but just wanted to hear people's experiences etc.

The sizes I'm after are front: 235/45R17 and rear: 255/40R17 (or maybe 265/40).

Also I have no idea what compound to go for - the tyres will be doing the Mt Cotton hillclimb and trackdays at QR only (5 lap stints), I don't plan to use them on the street except to drive there and back.

Thanks :P

Link to comment
https://www.sau.com.au/forums/topic/107421-buying-semi-slick-tyres-in-brisbane/
Share on other sites
maccattack Proficient

maccattack

Posted
Posted (edited)

I've bought D02G's from Qld Raceway before - no problems at all. Previously ran the Bridgestone RE55's which I think (in my opinion only) may be a slightly superior. Bridgestones you can buy from Tyretech.

If you wanted a tyre specifically for hillclimbs, I would look at the Toyo Proxes (R compound) available at plenty of places (bought mine at Keith 4 wheels) Extraordinarily good in short sprint events. At QR, they start to go off by about lap 3 or 4 and become too "squidgy" but would be superb for hillclimbs.

Edited by maccattack
hungry6 Experienced

hungry6

Posted
Posted

I got Dunlop DO1J on my street car, they're dot rated and I have been quizz in the past by the officers of the law, just point it out to them, that's all. I think D01j comes in 3 compounds soft/super soft/ chewing gum. just get the soft/or medium, as the chewing gum one only last about 1500-2000k on the street and alot less on the track. Very nice tyres , with plenty of grip/warning.

maccattack Proficient

maccattack

Posted
Posted
Cost to KMs, and wet weather would be two of the big ones.

Wet weather is no probs for semi's. It's the rubber compound, not the grooves that keep you stuck to the road. I've run semi's in the wet before with great traction. But you're right - cost per km is the killer.

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
Wet weather is no probs for semi's. It's the rubber compound, not the grooves that keep you stuck to the road. I've run semi's in the wet before with great traction. But you're right - cost per km is the killer.

Id debat the thing with the wet weather. I guess it would depend on the tread patter to some extent. Some cars I have been in with them on, bit of rain, bloody hell, never again.

gtr660hp Experienced

gtr660hp

Posted
Posted

Ive just fitted 235 and 255 on my GTR Falken Azenis RT215-fine in the rain last night(I have over 400hp at wheels)-they are DOT approved and George at Tyrepower at Albion did them cheap as and got them in one day.

JCMarshall_Law Proficient

JCMarshall_Law

Posted
Posted
Ive just fitted 235 and 255 on my GTR Falken Azenis RT215-fine in the rain last night(I have over 400hp at wheels)-they are DOT approved and George at Tyrepower at Albion did them cheap as and got them in one day.

Can I ask how muck "cheap as" is?

They were 18" right ???

gtr660hp Experienced

gtr660hp

Posted
Posted (edited)

No sorry 17's cause mine is a 32GTR-one key to light weight is going 17in -less unsprung weight unless youve got super lightweight 18in rims(then there can be strength issues)

$1300 fitted and balanced-He even lowered my coil overs to suit for nothing-best people to deal with.

Others in Bris were quoting over $1400 without fitting

Edited by overev1
hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

the Azenis RT215 really isn't an R compound tyre. far too hard and lacks the outright grip of a true R compound. Better than a normal street tyre though and probably not a bad choice if you only have one set of rims, because they'll last alot longer than a proper R tyre on the street.

I've used the Azenis RT215, a Hankook Z2000 race tyre, Yoko A032R, and Bridgestone RE55S. The Azenis are about 1.5 to 2 sec slower at Mt Cotton than the proper R tyres.

Talk to Craig at Hornibrook Tyres. He's the cheapest around for motorsport tyres, and he'll look after club motorsport competitors because he is one himself! He's a regular at Mt Cotton and motorkhanas etc. Tell him Harry put you onto him.

5 Basalt Street,

Geebung QLD 4030

Phone 3865 1072

Mobile 0401 474 745

The Dan Grand Master

The Dan

Posted
Posted
Wet weather is no probs for semi's. It's the rubber compound, not the grooves that keep you stuck to the road.

That is actually incorrect. The compound keeps you stuck to the road in the dry...the only thing the grooves are designed for is wet weather traction.

That is why drag tyres have no grooves, they don't race in the wet.

MountainRunner Mentor

MountainRunner

Posted
Posted

Probably it would be right to say that the grooves pump the water out in the wet so the tyre can make contact with the road. The compound is softer on R-Compound tyres so they do stick better in the wet. That's why wet weather tyres perrish in racing when the track drys out.

Russco Proficient

Russco

Posted
Posted
Talk to Craig at Hornibrook Tyres. He's the cheapest around for motorsport tyres, and he'll look after club motorsport competitors because he is one himself! He's a regular at Mt Cotton and motorkhanas etc. Tell him Harry put you onto him.

5 Basalt Street,

Geebung QLD 4030

Phone 3865 1072

Mobile 0401 474 745

I second this, just bought a full set from Craig, top bloke & good prices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...