Jump to content
SAU Community

Recommended Posts

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

Some interesting points being made & pleanty to think about.

I think you'll find as far as some being quiet on the outside but loud inside it comes down to the quality of the resonator being used. I really hate the vibrational humm of the standard exhaust from inside when at low revs under load, but it does still have a fairly loud idle from the outside too, but not as much when you rev it.

As far as a pod filter making more noise is concerned, I'm not getting 1 for that exact reason. I've got an Apexi high flow panel filter on order that should do just as good a job. Many people have already said and proved for themselves on a dyno that all a pod is going to do is make more noise. So an exhaust that isn't too loud should still be heard clearly.

A far as the Kakimoto exhausts are concerned I will be looking carefully. I have noted with a few brands now that they offer various levels of loudness with their exhaust depending on what it is to be used for. Anything which you have to fit a restrictive silencer to keep the noise level down will not be on my shopping list that's for sure.

I appreciate the the input guys.

Out of interest.. where is the best place to get a Kakimoto from?..

I'm not quite looking at buying yet.. but further down the line it's definately something I wouldn't mind getting..

Yeah I went to search last night for them on the net & turned up nothing. Everything else I've looked up I've generally been able to find at least 1 local seller.

So I'd like to ask now if anyone knows of some places that I can get Fujitsubo & Kakimoto exhausts to let me know. I did find one company called top spec, but they've botched their site up as it has prices but not what car they suit! I'm also looking at the Trust systems with increasing interest & maybe HKS though I'm a bit wary of the quality of those, not sure what they'd be like.

FUJITSUBO EXHAUSTS

http://www.musecret.com.au/

Just go to PARTS -> EXHAUST (no prices so you'd have to contact them)

Used Kakimoto

http://www.upimports.com.au/UPI_Parts/exhaust1.php (r33)

http://www.upimports.com.au/UPI_Parts/exhaust2.php (r32)

Not sure where you can buy Kakimoto exhausts new.

Electro- why are you wary of the quality of a HKS exhaust??

Cheers mate. Much appreciated

I am a bit wary because HKS is one of those brands who get every 1 else to make stuff for them & put their name on it. Who knows where it's made & how good it is. Having said that I haven't actually seen 1 so I can't cancel them out. I did see a Blitz system in Autobahn on display only a few weeks back & the welds on that were shite. They had a Drift exhaust on display that was cheaper & better made. So it pays to watch some of these big brands

Edited by Electro

Thanks man I'm going to PM him now.

I also emailed MU secret, as well as this Top Spec Site I found but haven't heard back from either yet.

Will keep people posted.

Also to add more complication I've found another brand, Rein Hard. Anyone with any comments about these exhausts would be greatly appreciated.

Edited by Electro

hey mate,

I got a 2nd hand Apexi N1 exhuast about a year ago, and in my opinion its one of the best exhusts for R33's around. I got plenty of mates who has R33's with other branded exhuasts but for performance and stealth its hard to go past the N1. Its pretty quite until u hit high RPM's and made a massive difference in power after i put it in. the exhuast note is a low rumbeling sound you can feel rather then hear, and pretty quite when your not pushing it hard. im just in the process of looking for a suitable front/dump pipes and also a high flow cat to get a little more out of it.

my 2 cents.

Din.

PS: i paid 500 for the exhuast on the forums. My theory was id rather get a good reputable jap brand 2nd hand rather then get a cheap new one.

Thanks for that input, some deacent info there.

I have seen the Apexi N1 cat backs for about $750 + frieght brand new, so they're not exactly going to break the bank.

Just a couple quick questions:

Is the N1 an angle or straight out exhaust?

How rigid does it sit when fitted & does it hang low?

post-2347-1142339271.jpgpost-2347-1142339408.jpg

Thanks for that input, some deacent info there.

I have seen the Apexi N1 cat backs for about $750 + frieght brand new, so they're not exactly going to break the bank.

Just a couple quick questions:

Is the N1 an angle or straight out exhaust?

How rigid does it sit when fitted & does it hang low?

its on a slight angle, it sits pretty nice and tight and dont hang low and you wont have any scraping issues unless your car is dumped to the max.

Dont know if these pics would help.

Cheers, that's some good pic's. Hopefully if people keep posting stuff like that many people will be able to make a decision about what exhaust they will go for. I'm still undecided, but that was a great help, thanks

Ok I've really looked a bit harder at the Apexi system & while it may be quiet, it's definantely not the look I'm going for. Like I've said previously I would like a good quality system that's not angled & would like twin pipe if I can get 1 worth having.

I still have heard nothing back from either Top spec or MU Secret about fujitsubo exhaust, which I thought was a bit weak & I have seldom found a Kakimoto exhaust for an R33 either.

I don't know enough about Greddy/Trust or HKS exhausts to rule them out either, but I'm leaning towards the Fujitsubo or a custom system if I can't get a bolt on that I'm happy with. I've also seen another brand called Rein Hard just to add extra confusion, which sells a Titanium twin pipe setup for $975 which is supposedly 'Silent'. Though I can't be sure on that 1.

Just to clarify I'm after a system that makes a bit of noise at mid to top end, without too much bass. I want enough that you can definantely hear it when you put ur foot down, but so it's just a nice burble that you can hear only with the windows down when cruising.... Or as close a compromise to that as possible.

Any comments on the power gains people got from their bolt on's/custom systems would also be appreciated. I'd like to get as much info on here as possible for future referece of others too.

Thanks for the input so far guys

Edited by Electro

Hey Electro,

I'm still looking for an exhaust for my R33 as well, I found out that BT Revolution, a business trader on these very forums can source Kakimoto systems - the one I'm looking at that sounds like it may also suit your requirements..it's a Kakimoto.R cat-back, they're not cheap but apparently the quality, quiet but awesome sound and performance gain make it worth the cost.

Check out his thread for details:

http://www.skylinesaustralia.com/forums/in...T&f=141&t=82023

Hey mate - how did you go?

I'm in the same position with you. Got a stock R34. BATMBL dump + front (have had one on my R33 for 2 years and it's been good), maybe the CATCO large cat (non-stainless) and perhaps the Fujitsubo Legalis from BT Rev. A friend has that Fujitsubo exhaust and the cars got good power and it's nice and quiet. Not angled either which is nice.

All up though looks like I might be getting close to $2k after fitting... argh

Yeah I can't see myself getting out of it for much under 2 grand. Though I will be fitting the system myself unless I go full custom. Mr BT-Racing seems to have no knowledge of a twin Fujitsubo system so I may be up the creek there.

Two other options I've got is a Rein hard exhaust, or a full custom system by exhaust technology. I'm getting fussier as to what I want as I know I won't be happy if I get something else that I don't like the look of.

Hey Electro, I'm still in the same position as you...I just don't want to compromise on my original ideas, so it looks like my exhaust is going to cost just over 2k which is going to hurt the wallet big time!!

(still thinking BATMBL front/dump & 'metal' cat with Kakimoto.R catback from BT-Revolution)

FYI - I heard the twin pipe Reinhards are pretty damn loud without the tail-pipe silencers in, and they spoil the look of the exhaust IMO.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...