Jump to content
SAU Community

Pre-purchase Inspection

Mid_Nite_R33

By Mid_Nite_R33,
in Victoria

 Share

Recommended Posts

Modena Grand Master

Modena

Posted
Posted
Hey everyone,

Can anyone recommend a trusted performance work shop that does pre-purchase inspections on japanese performance cars?

Possibbly in SE melbourne area.

Thanks

Good question. I got RACV to do the full test on Line im looking at... the works with hosting the car up etc. *Fingers crossed*

CORBSTR-32 Enthusiast

CORBSTR-32

Posted
Posted

Im actually going to look at a car this week aswell and i was thnkin the exact same thing... where can i get a full inspection of the car done??????

I got RACV to do the full test on Line im looking at... the works with hosting the car up

where did you go for that?

do they have a workshop you can take it to??

how much is this going to set you back??

anyway hope it all goes well for you, goodluck with the car :laugh:

if anyone else knows of a place i'm sure we'd all like to know about it

morgsj50 Community Regular

morgsj50

Posted
Posted

i just went through this, it's a pain in the but. i used racv, the only thing is they wouldnt come out to see it, cos its an import or something, anyways they'll only do a comprehensive check, set me back $215. it can get expensive if they dont pass, the first one i got checked out didnt. if its a black series 2 in the malvern area pm me lol

Modena Grand Master

Modena

Posted
Posted (edited)
Im actually going to look at a car this week aswell and i was thnkin the exact same thing... where can i get a full inspection of the car done??????

where did you go for that?

do they have a workshop you can take it to??

how much is this going to set you back??

anyway hope it all goes well for you, goodluck with the car :/

if anyone else knows of a place i'm sure we'd all like to know about it

Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

Edited by Sir-D
morgsj50 Community Regular

morgsj50

Posted
Posted
Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

what car yard? power rd? the guys at cheltnam did 2 tests for me, they check everything, even picked up some body repairs that i couldnt see.... plus they'll pick things you might not notice in a test drive

morgsj50 Community Regular

morgsj50

Posted
Posted (edited)
Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

i actually went out to pick up the report, that way the guy that did it can discuss it with you and point things out...

good luck...

Edited by morgsj50
Taso84 Mentor

Taso84

Posted
Posted

My old man once bought a car after having it "RACV inspected" and they missed a whole heap of stuff and the car ended up being a lemon. Better to take u car to an import specialist. Theres quite a few in the SE region, kangaroo rd oakleigh is one but there are others that i can remember off the top of my head.

FATGTS-R Experienced

FATGTS-R

Posted
Posted

I had Nizpro do the pre purchase inspection on my car.

Cost was $250 and included a road test, full mechanical and suspension/brake inspection. Body/chassis inspection.

Leak down and compression test along with a power and air/fuel ratio test on the dyno.

I thought it was expensive at the time but after seeing that RACV want over $200 to scratch there heads I guess its a bargain.

Do RACV do a leak down?

Modena Grand Master

Modena

Posted
Posted (edited)
My old man once bought a car after having it "RACV inspected" and they missed a whole heap of stuff and the car ended up being a lemon. Better to take u car to an import specialist. Theres quite a few in the SE region, kangaroo rd oakleigh is one but there are others that i can remember off the top of my head.

I was unable to get my friend mechanic to look at it as he has a workshop in Brunswick but the car is in Dandenong. But after RACV check the car and if they OK it, ill take the car to him and do another inspection to confirm what they said... if anything is dodgy its back to the car yard to fix the problems or money back.

Edited by Sir-D
Taso84 Mentor

Taso84

Posted
Posted
I was unable to get my friend mechanic to look at it as he has a workshop in Brunswick but the car is in Dandenong. But after RACV check the car and if they OK it, ill take the car to him and do another inspection to confirm what they said... if anything is dodgy its back to the car yard to fix the problems or money back.

Thats it, also make sure u do a leak down test, prb the most important one

Modena Grand Master

Modena

Posted
Posted
Thats it, also make sure u do a leak down test, prb the most important one

Well the report came today... there is a need to catalytic converter to be changed (i think its cos of Australian compliance) also the engine has oil leaks which needs immidiate attention according to RACV. I told the car yard and they are meant to fix it up this and next week. I told them unles they fix it Im not getting it. Shoukd I bargain on the price now since theres a few things wrong with it? Also it drifts slightly to the left when driving so wheel balance is needed.

Leak down test is to see what leaks like the oil??

Modena Grand Master

Modena

Posted
Posted
i'd be careful, the car yard is gonna fix it as cheap as they possibly can... depending on what else is wrong, i'd probably be lookin else where, but, at the end of the day it's your money...

Yeah I will have to get it rechecked by RACV again, its like 75 bucks. Also the car has 12 month warranty as long as you service every 6 K and no engine mods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...