Jump to content
SAU Community

Recommended Posts

lol yes it was EOI.

And there is plenty of it.

The back room here just isn't ready yet.. I've got exams on so I'll get my arse in to gear and rig up some secure tables that span around the room. :rofl:

Power is the next issue.. Unsure if a single 15amp feed out to the back room that also powers lights to be sufficient. :S

yeh, should be ok, i mean, 6 computers with monitors no problem, 7-8 pushing it, id think about getting a long extension cord from another section of the house to power any more than another 4. 12-16 people is the sweet spot in numbers anyway, less its boring after a while and more its to much trouble. get every1 to pay around 15-20 bux for power and food/drink for the day and BYO alco.

In the mean time if any one runs in to a sparky ask him how many pc's he thinks its safe to run off each power point. i.e power boards. :S

I've got 6 dual outlets in the same room.

Obviously we will need a pair of headphones each also. :P

yeah I would have thought 6 PCs per power 'zone' .... normally you would have 1 zone per section of the house (most houses have 3 zones), and likely all of the 6 power points in your rumpus room would be on the same zone. So what you do is run an extension cord from the complete other end of your house, so you get 2 zones of power to use.

When we built our house I got the sparkies to put 3 different zones to my rumpus room for this exact purpose .... then I went and ruined a perfectly good LAN room by putting my beautiful pool table right in the middle of it :dry: .... I also have 3 zones of power in my office for the large number of electrical devices I run in here too :P

Well a power board can supply what 2400 watts can't it 240x10 and your average computer would use ~350W tops and a 17" LCD uses ~40w so that works out to roughly 6 PCs.

I may be completely wrong though

my pc uses 3 case fans, the psu fan running, watercooling pump, and 2 external fans on the radiator. The psu is a 550W antec jobbie + a 20" widescreen, so a couple more newer pcs would blow the power usage right up...

Edited by Bl4cK32

Hey Madaz,

this is the stuff that i am doing. At the moment this is only 69000 polys and my computer is starting to struggle with it.

i'm not sure if its only my video card that need up grading or more

I have a gig of ram which helps, The video card is only a 128mb ati radeon 9600.

got a 2.6ghz cpu

any suggestions?

post-26183-1163830866.jpg

post-26183-1163831013.jpg

No mate, starting to do it proffesionally (paid woohoo) now and just need a bit more power to help run smooth. The model in the pics is only 60pixels long I just need something that will stop it running jerky when doing the fine details

With regards to how many pcs you can run off one powerpoint, wouldn't that have something to do with how many amps each is pulling? Powerboards usually have a 10A fuse, regardless of how many outlets...

Is it possible to measure how many amps an average high-spec'd pc draws and use that to work out how many could be run safely off a single powerboard etc? I presume powerpoints themselves also have a limit to how many amps they can provide? dont know enough about the electrical side of things to go any deeper into it.

its also worth noting that a 350w power supply means 350w MAXIMUM (or "safe" maximum? before its likely to fail). It would normally run well below this amount, obviously depending on how much of the system you're using at any one time. I think the biggest power drawers are your video/tv cards and drives...from memory (used to be a tech years ago).

plus I only have 2 pc's (running off separate powerpoints) so no problems at all. :)

good luck with the "lan party" :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • With the system, once you drive it for a bit, and before you turn the car off, does the car fix its date and time? When you say the date is wrong, what date does the vehicle think it is, and does it always show the same date? My thoughts from a process driven view is; The system may be defaulting to a standard start date/time. The main reason you'd typically see this occuring, is the system is losing its constant/backup power supply.   If its always defaulting to the same date/time at start up, and especially if it fixes itself while driving, I'd say either the non volatile memory has an issue, or the power supply to the volatile memory that stores this information.   The other thing I'd check is if there is anywhere in the system you can adjust the date and time from. If the date/time is still moving forward since it wished you happy new year, then it is 100% possible the system has just had a bit of data corruption occur, and you likely need to find a way to reset the date/time in the vehicle.
    • Scissor Jacks are an accident waiting to happen, the only time they should be used are in an roadside flat, even then a tyre and rim should be placed underneath 
    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
×
×
  • Create New...