Jump to content
SAU Community

Recommended Posts

321100944.png

I'm with Adam as well Andrew with this result........big difference in Ping speed, what's that all about?

I upped the ante to Aggressive mode (ADSL2+) and it upped the ping rate slightly but dropped the download rate..........maybe time of day??

321485875.png

The ping will vary - 2ms is nothing. :D

Distance from the exchange.

My own service connects at a slower speed when connecting with ADSL2+ compared to ADSL1.

However connecting as plain old ADSL2 (without the +) it connects at its fastest.

What you need to do if your modem supports it is place your self on an ADSL2+ standard type profile that aims for an SNR of around 9-10 and then force the modem to connect 'only' in ADSL2 mode.

Doing so will generally provide the quickest connection at a longer line length.

231405745.png

LAN limited :P WOOT :(

bizarrely while my ADSL1+ gets a MAX of 4.5Mb/s on speedtest, sometimes I get download speeds as fast as 600kb/s in UTorrent, when downloading multiple torrents from a good source (like tvtorrents private tracker). I am not sure how I get such good speeds sometimes - yet have NEVER downloaded from the 'normal' internet (even direct from Adam or a pipe) at that 600kb/s.

321617741.png

Supposidly (got spelling) i'm on ADSL2+ with Internode and this is all I get living in Panorama.

Pretty pathetic in my opinion.

Ignorance is bliss.

All bets you are on the ADSL2+ Very High Reliability Profile and haven't changed it since day one. :P

Double check to ensure all devices connected to your phone line are filtered. The modem doesn't require a filter. Run a <3m telephone cable.

The ping will vary - 2ms is nothing. :)

Distance from the exchange.

My own service connects at a slower speed when connecting with ADSL2+ compared to ADSL1.

However connecting as plain old ADSL2 (without the +) it connects at its fastest.

What you need to do if your modem supports it is place your self on an ADSL2+ standard type profile that aims for an SNR of around 9-10 and then force the modem to connect 'only' in ADSL2 mode.

Doing so will generally provide the quickest connection at a longer line length.

231405745.png

LAN limited :P WOOT :)

Thats quick, dies anyone still use dail up, they were the good old day take a week to down load a pic of a car!!

Thats quick, dies anyone still use dail up, they were the good old day take a week to down load a pic of a car!!

Now now, before I had ADSL (still on 1, no 2+ here ;) ), I used to download several gigs of anime & movies using good old dial up.

It does take several days or weeks for the 700mbs, & people can't call the house (which isn't really a bad thing, considering all that telemarketing crap I get everyday).

Edited by Mayuri Krab

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (Rb25det intake manifold) I’m having a hell of a time trying to find the full part or part number of this coolant hardline so far I was given these (Below) but they aren’t what I’m looking for and was told it’s the IAR or aac valve but that doesn’t seem to be it either. If someone could point me in the right direction it’d be greatly appreciated. Or if anyone has it for sale that’d be great too. I have recently purchased a greddy manifold and I can’t seem to find my old one to pull it off.  (Front Heater Return / Water Pipe (under intake): Primary part: 14053‑21U10 (front return pipe assembly for R33/R34 RB25DET) Alternative listing: 14053‑21U00 (same pipe, sometimes interchangeably referenced)   Heater Feed Pipe: Listed as 14075‑04U00 or feed-related variant 14053‑AG500)    
    • This sounds cool. But, as per usual, anything really complicated like that, that I take on, constitutes a steep learning curve that I never actually "learn". I just get it working, install it and start using it. Then, when it breaks a few months later, I've got no memory of what I did, how I did it, or even the bloody IP address I gave it. I'm having more or less exactly that problem right now. My Proxmox machine was discovered to be non-responsive, and the VMs on it were ditto. Power cycle it to a stream of loud Dell beep codes - which was unpopular at midnight, I can tell you. Move it to the lounge room so I can HDMI it to the TV for a screen, see the boot messages complaining about the /PVE/data having all sorts of LVM problems, saying it needs to be fixed manually. And I'm like....great. How am I going to work out what I need to do? At least it wasn't the stupid Silicon Power SSD shat itself. Mental note for all readers - DO NOT BUY SP SSDS! They are shit. I have had one take out an entire VM setup already, and this one could have done the same. Maybe it actually has. Cheap Chinesium shitbaskets. I won't cheap out again, even on play projects with no budget. Because my time budget having to fix shit is worth far more than the cost of proper parts.
    • I do typically agree. These days even the screens most people use have more of a boot time than the main device. However, I've seen an interesting use of the RPi in vehicle, however it involves effectively building your own OS and MBR, as then it boots up exceptionally quickly, as you don't have everything needing to start up, and you can then also run it up as an RTOS, while still having more compute than an Android can give for things like display, and processing. A very huge task that would be though for Duncan, I'm not sure that's his skill set (or Arduino programming and wiring) ha ha. If end goal is definitely just water cooling, Arduino would be the simpler setup especially for a rookie. If he wants extra display stuff though, bashing some code in Python on an RPi may be the better result for both systems.   Unfortunately the new device I'm building at work which runs a display, is too slow of a display for dashboard style purposes. More extreme low power, update only a couple of times a day type system
    • I don't like "actual computers" for in car use. They take time to boot up, have OS annoyances, and so on. Arduinos etc are ready to go a few seconds after power on, don't mind being agressively powere cycled, because everything is non-volatile, don't mind being shaken and stirred.
    • As Fred would tell us, it's all about interpreting the rules. It's not a water sprayer, it's a water mister... But everything else you've said, 100%! Even a raspberry Pi would be great, use HDMI out for a display, and add a raspberry Pi CANBus hat to read values out from the ECU.
×
×
  • Create New...