Jump to content
SAU Community

Recommended Posts

321100944.png

I'm with Adam as well Andrew with this result........big difference in Ping speed, what's that all about?

I upped the ante to Aggressive mode (ADSL2+) and it upped the ping rate slightly but dropped the download rate..........maybe time of day??

321485875.png

The ping will vary - 2ms is nothing. :D

Distance from the exchange.

My own service connects at a slower speed when connecting with ADSL2+ compared to ADSL1.

However connecting as plain old ADSL2 (without the +) it connects at its fastest.

What you need to do if your modem supports it is place your self on an ADSL2+ standard type profile that aims for an SNR of around 9-10 and then force the modem to connect 'only' in ADSL2 mode.

Doing so will generally provide the quickest connection at a longer line length.

231405745.png

LAN limited :P WOOT :(

bizarrely while my ADSL1+ gets a MAX of 4.5Mb/s on speedtest, sometimes I get download speeds as fast as 600kb/s in UTorrent, when downloading multiple torrents from a good source (like tvtorrents private tracker). I am not sure how I get such good speeds sometimes - yet have NEVER downloaded from the 'normal' internet (even direct from Adam or a pipe) at that 600kb/s.

321617741.png

Supposidly (got spelling) i'm on ADSL2+ with Internode and this is all I get living in Panorama.

Pretty pathetic in my opinion.

Ignorance is bliss.

All bets you are on the ADSL2+ Very High Reliability Profile and haven't changed it since day one. :P

Double check to ensure all devices connected to your phone line are filtered. The modem doesn't require a filter. Run a <3m telephone cable.

The ping will vary - 2ms is nothing. :)

Distance from the exchange.

My own service connects at a slower speed when connecting with ADSL2+ compared to ADSL1.

However connecting as plain old ADSL2 (without the +) it connects at its fastest.

What you need to do if your modem supports it is place your self on an ADSL2+ standard type profile that aims for an SNR of around 9-10 and then force the modem to connect 'only' in ADSL2 mode.

Doing so will generally provide the quickest connection at a longer line length.

231405745.png

LAN limited :P WOOT :)

Thats quick, dies anyone still use dail up, they were the good old day take a week to down load a pic of a car!!

Thats quick, dies anyone still use dail up, they were the good old day take a week to down load a pic of a car!!

Now now, before I had ADSL (still on 1, no 2+ here ;) ), I used to download several gigs of anime & movies using good old dial up.

It does take several days or weeks for the 700mbs, & people can't call the house (which isn't really a bad thing, considering all that telemarketing crap I get everyday).

Edited by Mayuri Krab

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just 2, and inline. One switch temp related other switch driver controlled.   I'm nearly in my head back to Arduino land for it...
    • Complex conex, sand in X shape. And don't go hardcore. I find putting on filler to be the art here to help.
    • Hey y'all, I have a completely stock 1991 R32 GTR, yesterday I took my car out and went for about a thirty minute drive. It was fine on the way there but when returning home I think the car might have gone into a limp mode. I was cruising in 5th gear around 130km/h, the hicas light came on and there was a significant loss of power. About a minute later I hear a thump, the car starts driving normal again and is fine the rest of the drive back. This is the second time its happened, same as now it was fine on the trip there. On the way back it had the hicas light on but that time I would feel the power going in and out before hearing the same thump and it being fine.  I have no idea idea what causing this, but if anyone has any ideas it would be great as a start chasing the cause of this. Also I can provide more details if needed. Thank you
    • When sanding across a convex panel, you need to sand, as much as possible, at right angles to the curve. If the panel is compound convex curved (ie curved in both directions) then you are SOL and have to use "craftsmanship" to get it right.
    • Today in Skyline arts and crafts!! I’ve made some progress.    had to put extra notes in there so I don’t stuff it up 😂
×
×
  • Create New...