Jump to content
SAU Community

Recommended Posts

im running a shuttle atm, keen to do some fan upgrades on the old girl, cos my current summer beat the heat measure is to just take the cover off.

can u reccomend good fans for them seeing as u have done the leg work with R&D.

my biggest issue with the shuttle is i have shoehorned 4 HDD's into it lol... does not help with the heat

Sadly, you're pissing into the wind with shuttles

They had the right idea with their radiator being attached to the case but what you'll need to do is

a) reverse the flow of the fan so its sucking COLD air into the radiator rather than using the existing hot air and pushing it thru the radiator out the case

b) get a second fan so it runs in push/pull configuration

c) get an 80cm to 92cm adaptor if you can engineer it into the xpc

Ultimately, I got rid of shuttle for 2 reasons - crap customer support (mobo died, they wouldnt replace it under warranty because I'd modded the case - WTF. and they wouldnt let me buy a motherboard by itself either) as well as the fact once u put a beefy videocard in there, summer is almost impossible to keep it cool properly.

-D

Sadly, you're pissing into the wind with shuttles

They had the right idea with their radiator being attached to the case but what you'll need to do is

a) reverse the flow of the fan so its sucking COLD air into the radiator rather than using the existing hot air and pushing it thru the radiator out the case

b) get a second fan so it runs in push/pull configuration

c) get an 80cm to 92cm adaptor if you can engineer it into the xpc

Ultimately, I got rid of shuttle for 2 reasons - crap customer support (mobo died, they wouldnt replace it under warranty because I'd modded the case - WTF. and they wouldnt let me buy a motherboard by itself either) as well as the fact once u put a beefy videocard in there, summer is almost impossible to keep it cool properly.

-D

ahh kk, i'll put new fans in and reverse the flow when i get a sec.

my phone line had been dead for the last 2 weeks. prior to that i had so much noise on the line i had to drop my line profile to adsl1 high reliability to even connect, i finally sweet talked telstra into sending a tech (i had sussed it was not a cabling issue within the house by patching a pstn phone onto the lead in cable, therefore i wouldnt be charged a damn thing)

just did a speed test on the adsl 1 high reliability

1004620800.png

much better than the 400k my modem was synching at before the line died

will test again when i have gone back to adsl 2+ annex M high speed

:) :) :)

f**k me if Fallout: New Vegas isn't the most frustrating game ever!

Been waiting for the game for a year + - bought it yesterday retail, installed it and it is all working perfectly. Played 2 hours, quit out, do some work, then play again later for another 3 hours. Late last night start up the game to play some more and go to load my last save, and when it loads the game crashed to desktop and says "FalloutNV has stopped working" and that is it. Many people all over the net (not all) are having the same problem. I have tried a shit-ton of different things and none of them have worked.

Dying to play more of this awesome game (which has already been patched twice since it came out a few days ago), but it doesn't work. Sooooooooooooooooooooooooooooo frustrating. :):D:)

f**k me if Fallout: New Vegas isn't the most frustrating game ever!

Been waiting for the game for a year + - bought it yesterday retail, installed it and it is all working perfectly. Played 2 hours, quit out, do some work, then play again later for another 3 hours. Late last night start up the game to play some more and go to load my last save, and when it loads the game crashed to desktop and says "FalloutNV has stopped working" and that is it. Many people all over the net (not all) are having the same problem. I have tried a shit-ton of different things and none of them have worked.

Dying to play more of this awesome game (which has already been patched twice since it came out a few days ago), but it doesn't work. Sooooooooooooooooooooooooooooo frustrating. :P:):D

Nearly finished :) just to rub it in a little.

i know this comes up a little for car parts but has anybody used an American website that ships internationally that you can either use CC or PayPal and is trustworthy

I think Andrew mentioned someone in the US who shipped his Rims over for him, a few pages back in The Wasteland.

**EDIT** Was actually Brakes, and they were www.comgateway.com

yeah only as a last resort do i want to use a 3rd party

i found CompUSA will ship internationally but they only accept wire transfers then tack on a $25us surcharge then i imagine thy put a premium on for shipping and handling eating a lot of the savings

now is the right time to get a 6870 1gb from the states its just finding somewhere

seems that i can get a 6870 from HB outlet for $288 then what ever for shipping

unfortunately what i read is it has a be less performance than the 5870 hence the pricing structure but then it would have more performance than the 4850's and be a proper DX11 card

still trying to do some reading about benchmarks and stuff

hahahaha love garrys mod

I used www.comgateway.com to ship my brakes Steve - were VERY easy to get along with and have much cheaper shipping than I could find anywhere else - $24 for the 1st 0.5kg and $4 per 0.5 thereafter .... so a 4kg box only costs $52 for example. But the beauty is you can buy from various retailers and send them all to 'your'/their Oregon address and they repacked them all up into 1 shipment and save you heaps. When I buy my plenum spacer for the V35 it is light but big (so gets charged volumetrically instead of by weight) - so everything else they squeeze into that box (up to the appropriate volumetric weight) will be free shipping.

helping a friend of mine with a sick pc this weekend / on win vista. how the hell did microsoft get away with selling this f**king shambles of an OS...?

People say that, and yet I've never had any issues with it :P pebcak? whats he done/whats the problem with it?

given the hdd format, reinstalled clean copy of the os. runs fine first few times. throw in all the drivers, few reboots, good as gold. do a windows update - reboot, f**ked. master boot sector disappears. repair that with system recovery, back in as normal. go to install a few apps, windows installer now wont run. repair that, reboot, then i get the "no operating system" exists message / pc doesnt recognise the os.

and i've done this whole process with unsatisfactory results around 4 times now since thursday night.

so pebcak you reckon? do enlighten me with a solution Dunc...

i haven't started ruling out hardware (except the hdd) yet.

I would say your hard drive is failing. Run a Seatools on it and that should tell you.

werd, or a generic SMART tool - check to see if its throwing any flags. Doesnt sound like something the OS would do in my experience

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...