Jump to content
SAU Community

Recommended Posts

Wheels

Racing Hart CP-035

17x8.5+35, 15x7.5+40. Got this combination in to run large drag slicks/radials (can fit the 275/60r15 Mickey Thompson radials-28x11.5 inch- on these). $1500

Rays wheel nuts - pack of 20, includes socket - $150

Nismo extended wheel studs - pack of 10, 60mm long - $100

Suspension + Brakes

S15 Spec R front brakes/discs/hubs - near new, great for converting 4 stud to 5 on an S13 $600

Solid cradle mounts - New R33 $150

Tomei engine bay brace - Used, triangular strut brace, bolts from strut to strut to firewall $200

Turbos & exh manifolds

T67-25G turbo - Brand new, 8 or 10cm rear housing - $1800

Trust RB20/25 exh manifold - $1200, or will sell as a partial kit with the turbo, dump pipe, intercooler pipes for $3000

HKS RB20/25 exh manifold - High mount, T25 flange $1200

HKS 2JZ highmount twin manifolds - twin gates, T25 flange $900

HKS RB26 stainless low-mount manifolds - with crossover pipe - $1300

Trust alloy pipe kit - suit highmount single, from turbo to intercooler, intercooler to std RB26 intake. Has Trust type R blow off valve after intercooler, all silicon joiners and clamps - $550

HKS 2835R turbo - with internal wastegate 0.86 housing or 1.12 ext gate housing. $1200

SR20 stainless exhaust manifold and split dump pipe, new - $450

Diffs, gearboxs and drivetrain

R33 GTR complete rear cradle - diff, hubs, carriers, axles, suspension arms $750

R33 GTR + GTS-t axles - $80 each

R33 GTR alloy carriers, hubs, backing plates - $300

Assorted diffs - available, diff ratios 3.54 and 3.69

R33 GTR gearbox - good condition - $1,000

OS R3C clutch - used, alot of material left - $1200

OS pull to push conversion parts, run an R32 style clutch in your R33 - $150

Hi,

I'm chasing the metal intercooler pipe between the Twin Turbo pipe and the Intercooler on the passenger side and an R33 metal power steering resevoir.

Can you help?

Thanks

Stan

Impul - the Rays nuts are black

Stan - I've got both, will PM you

Black32 - I'll have a look, will have to open a few diffs to check.

driftking - yes they fit on an S2 GTS-t

any idea if the 33GTR gearbox will bolt into a 33-t? Know someone in dire need of a gearbox. Also, any idea of cost freighting it to Geelong Vic, 3220?

if it fits and can do a good price including frieght, ring Kris on 0421579800 an we'll sort out the finer details

thanks

Is the Trust RB20/25 Exhaust Manifold a high or low mount? I have a high flowed R33 GTST turbo with a T3 Flange. Do you have a pic of the manifold?

Abcent - GTR + GTS-t gearboxes are not interchangeable. Some internal parts are, but it's not a direct swap.

Mr Cash - Sorry, no RB20/25 stock replacement dump pipes. I do have a GTR replacement item, new, made out of titanium but thats $1200.

Xfixiate - I have a set of 6 std RB26 injectors, will PM you

Aridyne - The Trust manifold is highmount, and has a Mitsu 3 bolt flange

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...