Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

We also need a design maybe people could come up with some and we could have a vote or something to decide.

I think something simple kinda like the ones found in the S15. mostly plastic with a metal insert with "Silvia" written on it.

Looks horn.

If anyone has the exact font that the SKYLINE word is written in, I'd appreciate it if someone could send that to my email

EMAIL - satanic @ optusnet.com.au

Kickplate coming off my car for measurements tonight then the design will be sent off for fabrication. Etching process will be the last thing done, I just want to see what the overall effect will be like first.

Just so you know, we can put any design onto these plates... the majority will be SKYLINE but we can cater for anything custom providing you give us the design. Plates will be done in Titanium with a Silver/Gold plate (again by preference).

Titanium was decided upon as it is very workable and very very durable which is exactly what you want for something that will see a lot of rough work (shoes, dirt, knocks).

Approximate Costing:

SKYLINE panels will be mass made and will be the base price.

CUSTOM panels will be made to order and will obviously cost more.

Silver Plating will be the base model.

Gold Plating will be a premium option.

I had a sample sent over that was made in Titanium with a Gold Plating + etching; this was a once-off prototype and cost $150AUD. Obviously the final product won't cost anything like that - this was just a sample and a prototype :dry:

OK little update yet again;

The CAD Drawing for the R34GTT kickplate has just been done up... for the R34 we've decided to do 3 seperate pieces;

LEFT >>> CENTRE (SKYLINE) <<< RIGHT

We've decided that a full replacement will NOT be the best option, as the costs to make the mould will be very high. If a direct replacement must be used, Injection Moulded Plastic must be used (costly).

Normal Fibreglass would not be good for this item as every time you take it off for service/installs you would run the risk of snapping the panel in half.

As such we are making the metal kickplate inserts that will be integrated into the existing panel. The adhesion process is still be sorted out (deciding between an adhesive or a bolt/rivet).

Update from the supplier - three colours will be available;

1) Titanium Finish (Silver - Chrome)

2) Titanium Gold Finish (Gold Plated)

3) Titanium Black Finish (Black - Glossy)

The third option I did not think would be chosen but I have had some members ask whether it could be done as they have sprayed the kickplate some other colour (e.g. white)

I am hoping to have the first prototype of my kickplates done within 2 weeks. Please be patient for this process to take place.

SOMEONE GET ME THAT SKYLINE FONT!!! ALL GOOGLE IMAGES SUCK!

Thanks mate... having the font will be much better than blowing up a logo in picture format. We'll be able to load each character into the etching machine instead of a flat image - means cleaner cut letters.

Also, if any of you are lawyers or professionals in intellectual property law - could you please advise on the legalities behind using the SKYLINE logo? I know for a fact that using the GTR logo is prohibited inside Japan.

I had a read in the law books at home and there is something along the lines of a disclaimer I could use? Something like this product is NOT genuine Nissan and is in no way endorsed or related?!? Someone please advise...

Thanks

S

heheh damm, should have bought my friends one..

it came with his car, and looked really nice (silver-chrome one with Skyline engraved)

Pretty sure, you can purchase these from japan local shops.. Or maybe it was a factory option??

OK designs sent off - didn't end up using that SKYLINE logo that n15m0 found us (sorry bro), so what did we do?

Stay up till 3am measuring every damn mm on the real kickplate and making our own SKYLINE logo on AutoCAD. Took forever, but the end result is spot on.

Nothing like a set of digital calipers and pen + paper!

It's looking good boys, now the wait for the prototype to be returned - update soon!

Thanks guys! Appreciating the support and feedback...

I like EMERGENCY EXIT :laugh:

Personally I will have a set of SATANICs made up~

I did ponder with one idea though, having a laser etched "carbon fibre" look will also be doable. As a laser is being used to etch the metal, all they have to do is "weave" multiple layers onto the one sheet using different laser intensities - EASY!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...