Jump to content
SAU Community

Recommended Posts

hi i was wondering if anyone knew of any hassles or precautions that may occur when fitting a rb25 to r32 gts4 , and any idea's or comments about engineers cert for it("does it need it"). also is it worth wild over looking the 26 because of cost and oppting for the 25

Link to comment
https://www.sau.com.au/forums/topic/109142-r32-rb25-help-plz/
Share on other sites

PM Blind Elk...did the same thing you are considering, champ bloke who wont lead you astray with BS if he doesnt know...unlike me, who will tell you RB25s suck....p0pl who have put an RB25 in an R32 are probably the same ppl that piss all over the seat of the public toilets...i hate those guys :P

...p0pl who have put an RB25 in an R32 are probably the same ppl that piss all over the seat of the public toilets...i hate those guys :)
Oi. I represent those remarks :P

carl, put a RB25DET in, it will almost beat hands down a modded RB20DET. My RB20DET punched a whopping 115 kW through all 4; the RB25DET, running aftermarket ECU and crap 95 octane (Oz octane) and 10psi pushed 180 out through all 4 wheels. I figure that's close to a stock GT-R, and beats the crap out of those 5 litre lumps of cast iron V8 push-rod crap that can't even push that off the flywheel.

Oi. I represent those remarks :/

carl, put a RB25DET in, it will almost beat hands down a modded RB20DET.

Yeh yeh yeh...we know...But in my small galaxy the hot girls dont think they could ever be so lucky as to land a guy like me, thats the reason they ignore me...and the RB20 is god because i f i blow it up its $600 :D

Yeh yeh yeh...we know...But in my small galaxy the hot girls dont think they could ever be so lucky as to land a guy like me, thats the reason they ignore me...and the RB20 is god because i f i blow it up its $600 :D

Sounds like the planet where i live, but if my bottom end blows, its $100 :/

bottom end might be $100, but the adapter is $450 minimum.

mods to make it work on 4wd = another couple of hundred.

mods to the vvt head to make the vvt work = dollars.

oil restrictors to the head = small dollars

mods to engine mounts = more dollars.

new turbo due to 3L sucking your current turbo dry at idle = $1900 minimum.

to make use of this turbo and capacity, you'd want injectors, fuel pump and new tune = many more hundreds.

if you don't have the PFC already to run all this = $1000

New AFM to make use of all these goodies during the tune = $300 +

as much has I hate to say it, my rb30 dreaming days are over for the gts4.

I'm stuck with the ROYb20det.. :/

I've worked out I should be able to get to a REAL goal of about 200rwkw with about $4K and still have a drivable road car without TOO much extra lag.

I'll save my rb30 dreams for the future.. if I can be bothered.

so ROY - can I come back to the clan?

so ROY - can I come back to the clan?

Im not sure really, you seem for too sensible to become a blibbering RB20 POWAH idiot :no:

WHne im back in Syd next, take my car for a spin...im betting it will convince you to spend the extra 6 months spreading the cost of the RB309 over a longer period. I love my cars...its ace...but if you want grunty mid it just doesnt do the job

where do i get another rb20 for 600 bucks i just bought the rb30 and was gonna do the goods but i dont want to spend that dosh as my engine is lossing oil presure and has a wine at 1200 rpm and sounds like its coming from the 1st cam bearing (help)

where do i get another rb20 for 600 bucks i just bought the rb30 and was gonna do the goods but i dont want to spend that dosh as my engine is lossing oil presure and has a wine at 1200 rpm and sounds like its coming from the 1st cam bearing (help)
If you're in Melbourne, you bring a trailer and $600 round to my place - I still have the RB20 that I took out of the R32.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...