Jump to content
SAU Community

Recommended Posts

$60 dollars for a new set mate, if they are fouled dont be a cheap skate or you might pay for it in the long run. {new motor} etc. what you should be asking is a mechanic to look into why they fouled up .

good luck anyway :D

Consensus tends to be that you don't clean Iridiums. I've just put mine in and won't be touching them for a while. If they're fouled you'd be best replacing them and working out why they fouled so easily and fixing that problem. Otherwise, you'll just keep going through plugs. You should replace them either way, the choice is really do you fix the problem then get some fresh Iridium's or disregard the fouling issue and just swap coppers omre regularly.

Good luck

  • 2 weeks later...

I dont know why anyone bothers with iridiums or platinums.

Ive had them and yeah they last longer but dont perform any better. I mean its a pretty substantial dent in a budget for plugs.

Copper ones you can pay for fuel, grab a set and throw them in every few months and it costs f**k all! No need to cleen something that costs $4! Who gives a f**k, throw it out and but a new one.

Plugs shouldn't need cleaning if they are fouled your mixture is rich. A correct mixture will keep the plugs clean. Plugs arent finished when they are fouled! They are finished when they are domed. As i said if its fouled fix the mixture not the plug. This will in turn clean up the plugs by itself after driving...

Deren

I agree with Godzilla32,Thirty years of motor sport tells me that fouled plugs are mearly unburnt crap on your otherwise perfect plugs.A spark plug is a mechanical device,fouling it will not change it`s basic structure.Clean it, that will work fine unless it has over heated at some stage.

If the plug is fouled enough not to fire it will never clean up even if you fix the original problem....and the iridium and platinum plugs are almost impossible to clean without damaging the electrodes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...