Jump to content
SAU Community

R33 Airbox Questions

trevkdx

By trevkdx,
in New South Wales

 Share

Recommended Posts

trevkdx Rookie

trevkdx

Posted
Posted (edited)

Hi all just after a bit of help or info....

My mate has had his R33 for a while now and recently has been defected for his air intake setup. He has to take it to the EPA on the 22nd to have it cleared and have no idea what needs to do to make it comply. It has an Apexi pod filter with no airbox.

We need to know, what it needs in terms of an airbox and also whether it can keep this pod filter ??

Are there any aftermarket airboxes or similar I can get to suit an Apexi pod filter ??

We just really need to know what I have to do so it will pass.

Any help or input would be much appreciated because as you can see we only have a week to get it sorted out.

***EDIT*** I AM IN NSW

HAS ANYONE IN NSW BEEN DEFECTED FOR HAVING A POD WITH NO AIRBOX ?? Thanks...

Cheers,

Trev...

Edited by trevkdx
Link to comment
https://www.sau.com.au/forums/topic/109729-r33-airbox-questions/
Share on other sites
cogs Experienced

cogs

Posted
Posted

what state are you in? in vic i believe pod is illegal if you have a FMIC as only one intake mod is allowed or something like that.

pod should pass if you get a box (someone on these forums sell them, fit any pod on the market) or if you're worried buy a standard airbox or borrow one to get the defect cleared.

also try doing a search on this topic should be some helpful info around. cheers.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Hi all just after a bit of help or info....

My mate has had his R33 for a while now and recently has been defected for his air intake setup. He has to take it to the EPA on the 22nd to have it cleared and have no idea what needs to do to make it comply.

Why dont you ring the EPA?

I mean, logic would have it that if they are testing you... you have to meet the requirements they test for...

Wouldnt they know what the requirements are?

:P

monkeykplunk Mentor

monkeykplunk

Posted
Posted

You must either have the pod in a fully enclosed box and duct air in, or have the stock airbox on the car. Since the aftermarket one then replicates the design of the stock one, just with better components.

Where abouts in NSW are you?

Me and another guy on here are making up box designs at the moment. PM me for more info if you want it.

BazaR33 Collaborator

BazaR33

Posted
Posted

I think it just needs to be in a box, unique autosports in sydney sell air box's for skylines with pod filters. Or you can make your own with some tin snips and a street sign!! Just make sure the writing of the signs on the inside of the box...

evil_weevil Grand Master

evil_weevil

Posted
Posted

unifilter make an awesome airbox.

although its a complete set IIRC - as in pod and box.

borrow someones stock airbox for the day - or even buy a stock one from these forums, couldbe a few for sale, search :P

Midnight R33 Contributor

Midnight R33

Posted
Posted

Yeah i bought one of Maxx's CAI boxes i was impressed with the work done.

made from aluminium and has perspecs top and i just use the factory air scoop.

Not exactly sure if it would pass the EPA tests. I agree with calling them to find out what the go is.

Best of luck dude.

monkeykplunk Mentor

monkeykplunk

Posted
Posted

The UAS ones look good, but aren't much good in the way of passing EPA regulations.

Mainly due to the fact that they aren't completely sealed.

A mate made a replica of one for me and after a run in with a lovely officer, he informed me of what it needed to be. I also checked alot of regulations as well to make sure I was getting the right info before I went changing anything.

I must add as well that mine was one of the old UAS ones that were made for a stock cooler, so had more holes then FMIC ones.

Soulblighter Community Regular

Soulblighter

Posted
Posted

When I got done for my pod, what i did was got some aluminium, made two sides and a lid and bolted it to the car.

I managed to pass with that. I must admit i was really surprised as it looked really really shonky.

The epa guys/gals might be a tad more strict with the way they pass things. Good luck with that.

When the cop pulled me over and told me to pop my bonnet, he point to the metallic pod filter in my car and said that i would have to get rid of that as it was illegal to have it in there.

I asked him why it was illegal and his reply was, "because in the engine bay, temperatures get really really high and pod filters have a tendancy to catch fire and explode or something".

He said afterwards, " i dont want to be the one that gets called out to the scene because my car caught on fire and exploded because of the pod filter..." :thumbsup:

monkeykplunk Mentor

monkeykplunk

Posted
Posted

what?

what crap?

The whole reason you can't have an open filter of any sort is because it would be taking in heat and gasses expelled within your engine bay, thus creating more out the back end due to poor induction.

Or at least thats how I read it.

Hence why and stock air filter, in any type of car, will have an intake from outside the car.

Ezz35 Collaborator

Ezz35

Posted
Posted

when i bought my car, it had a pod fitted and i was defected(nice 2hours after buying the dam thing) and he said it changed emmissions...but im not running a map sensor not afm...

all i did was go and have it engineered and now its fine...not in a box(altho im getting one to reduce heat soak) havnt bn pulled over yet so not sure how that route would go... wasnt cheap but i was having some other mods done anyway

monkeykplunk Mentor

monkeykplunk

Posted
Posted
having the induction noise is the whole point of getting the pod filter.. pefromance wise i find it wouldnt be any better than the standard box running a k&n panel filter

I'm still really undecided on if this is true.

The problem I have with the standard box is the inlet funnel just seems too damn small to do any good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • S1_C34
      Stagea Front CV Axle Question

      By S1_C34 · Posted

      I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...