Jump to content
SAU Community

Recommended Posts

Hey

As most of you have heard - I broke my baby on the cruise... now the front end is completly f*ucked I thought this leaves me some room to change some things for the better.

What do you guys think of sileighty conversions? I think they look pretty good if you have a mean looking front body kit.

Is it a matter of just getting silvia side panels, bonnet and nose cone? Or would it be easier to stick with the 180?

Also where do I get car panel parts from? Just a jap wreck place? Can anyone recommend?

Link to comment
https://www.sau.com.au/forums/topic/10979-sileighty-conversion/
Share on other sites

don't ya need a whole front cut?

not for the engine though

but for the chassis?

180 front looks a bit more narrow

silvia bit wider

so silvia panels will be meant for silvia chassis?

correct me if i am wrong?

adrian :D

Is it hard to do? Is it just a matter of replacing the front panels?

I'm too cluey on silvias - what does a s14 front look like in comparison to an s15? Does someone have a website I can look at?

Rev - I agree - sil80's look very gay if not done right. I have seen some awesome ones in magazines - they have to have a mean looking front end. If you just chuck a silvia front on it - it looks crap

Sneeza,

I might be able to get panels for you, which ever way you decide to go. I like the Sil80's. C-red might be worth calling, cause they have brought some in previously and might be able to tell you what's involved.

See'ya:burnout:

Originally posted by GTS-t VSPEC

See'ya:bunrout:

BWAHHAHAHAHA!!! "bun route?" is THAT like the "tunnel of love thing" heheh

How hard is that pearl paint to re-spray? is it a two part job to a normal white undercoat or what ?

Can you put a pearl on a white car (ie mine) ? Easy stuff?

sorry, a bit OT.

I don't see insurance having a prob with it. I am not going through insurance for this bingle anyway.

I am reading on (god help me) silvias aust - they have an article about conversions. The s14 and the RPS13 (my car) were built along side each other - so its a matter of changing the headlight wiring and then bolt the nose cone on... and the panels. they reckon it is pretty easy

Kym,

I had to go and quickly change all my bunrout's into burnout's, don't want them thinking I'm gay:p

Sneeza,

If it's just panels then that should be easy. We can source some parts then help fit it for you, and maybe talk Works Auto into spraying it cheap to.

See'ya:burnout:

I just spoke to Geoff at C-red - REALLY nice guy. He reckons $1000 - $1200 for a sileighty conversion.... that's pretty good I thought!!! He said its just replacing all front panels and wiring. He also said respray the front for about $600.... He said he has a 180sx nose cone ($300) and bonnet ($500) if I want to stay with the 180. Are these good prices???

Thank paul for putting me onto them !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
×
×
  • Create New...