Jump to content
SAU Community

Recommended Posts

Hi all

I have a 34 GTT and was wondering when the radiator fan (the one that blows onto the radiator) is supposed to be on?

Is it supposed to be always on?

In the morning I drive it to work (5 mins away) and never see it come on, is this strange?

My oil and water temps all seem normal.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/
Share on other sites

Theres the black fan on the right side of the engine bay, and then there is the big white fan that blows onto the motor.

I am talking about the smaller black fan thats pushes air through the radiator. Dont know whether this is the aircon fan? So many fans I am confused! haha

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023158
Share on other sites

Had you done a search, you would have found .....

I have done a search and found 30 pages of crap.

And on some threads, people are saying it comes on when the car is on, others when the temp reaches X degrees.

I found your post as per below:

"The A/C fan is controlled by the thermatic switch in the bottom tank of the radiator. It only activates when the coolant temp gets too high. Under normal circumstances, the standard engine fan is able to maintain sufficient airflow to keep the A/C radiator cool.

However, if you have the A/C re-gassed with the modern stuff (R134a ?), get the fan re-wired to come on with the A/C."

Is the A/C fan the one that blows onto the radiator? If so then mine does not turn on when the air con turned on during a cold start (I hear something else click and sound like a fan though when the A/C is on, I think thats the compressor)

How hot does everything have to get before its turned on, even short 10 minute drives and it doesnt come on. I should really take it for a thrash and find out.

Edited by nuffsaid
Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023196
Share on other sites

It only activates when the coolant temp gets too high....
ie, when the engine starts to overheat with the A/C on. The 'switch-on' point of the switch is a few degrees above the thermostatted temp of the engine.

As I said in the post of mine that you found, the standard engine fan is usually capable of pulling enough air through the A/C radiator to control its temperature.

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023264
Share on other sites

Oh so even if the water temp guage is sitting halfway, it doesnt mean it should come on?

But say the air conditioning is on, and its a warm day and the car has been driven around for a bit, you'd expect it to be on right?

And when you are referring to the engine fan? thats the big one in the middle right? then where is this a/c radiator?

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023278
Share on other sites

Oh so even if the water temp guage is sitting halfway, it doesnt mean it should come on?
Right.
But say the air conditioning is on, and its a warm day and the car has been driven around for a bit, you'd expect it to be on right?
Not necessarily. If the engine isn't overheating under the load of running the A/C in the hot weather, then the fan won't come on.
And when you are referring to the engine fan? thats the big one in the middle right?
Yes, the one attached to the front of the engine.
then where is this a/c radiator?
It's the silvery one, out front; the one with the A/C fan bolted to it.
Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2024515
Share on other sites

Most of the points above I understand.

However, now I have to clarify:

are there 2 fans only, the engine and the A/C?

so the one I am referring to must be the A/C fan?

then why is this fan blowing directly onto a black radiator (the main big one) and not the A/C radiator which I now have to go and find somewhere. hahah

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2024557
Share on other sites

Most of the points above I understand.

However, now I have to clarify:

are there 2 fans only, the engine and the A/C?

so the one I am referring to must be the A/C fan?

then why is this fan blowing directly onto a black radiator (the main big one) and not the A/C radiator which I now have to go and find somewhere. hahah

Maybe someone painted it. If your A/C works, then you have an A/C radiator in front of the main radiator.

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2026464
Share on other sites

A/C definately works, especially when the car is parked under shade on a hot day.

However if the car has been out in the sun all day on a hot day, it doesnt work as well, but thats normal I think, all this black interior in the car doesnt help on sunny days! hahah

I also noticed that even at night, the cabin of the car can get a little warm, is this normal for skylines? they seem to make alot of heat. you can feel warm air coming through the air vents sometimes (heater is not on)

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2026499
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
×
×
  • Create New...