Jump to content
SAU Community

Recommended Posts

Hey mate do a search in the Victoria section. I asked the same question a few weeks ago. Very helpful advice such as take it to a place that knows skyline, not just your average joe wheel alligner. Make sure it is a 4 wheel allignement. I'm yet to get mine done but I will be going to centreline when I get around to it. Read up.

Cheers...

Russell

i'm located in eltham but travel to traction tyres in rowville also. Got some work done from them last week on my car. always do a good job and dont screw u around.

both times i've gone also... i've left, then come back later just as they're taking it for a test drive without them realising, and neither of the times they thrashed the car at all like im worried most workshops would. so definately a good thing in my books.

9764 2811

Give Ralph at TruTrack a call on 9326 5392. Located in North Melbourne. He does an EXCELLENT job and you get a free check up in 5,000k or three months also! Tell him you know me and he will look after you.

Jenna

I would recommend Techsport in Bayswater 97209300.

Zach is very methodical and fastidious. He has done the alignments on the majority of the fastest track-day skylines in Victoria.

He is the only person I would take my car to, or recommend.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...