Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering does anyone have a set of those d2 coilovers from just jap in their car? Anyone got any thoughts on them. obviously for the price they will not be the best coil overs around but im just curious are the spring rates etc ok for street, Without having to install new kidney's i mean...... :(

Link to comment
https://www.sau.com.au/forums/topic/110077-justjap-d2-coilovers/
Share on other sites

Have you seen their new G4 coilovers for $1399? Similar to D2 with different rate springs available.

Check the business traders section

Thanks blitz will have to check em out.

Hey scary32 you in sydney????? going to any of the track days or cruises soon? It would be cool to check a set out on a car before i bought anything. Dont have the dollars yet anyway but always researching the next mod!!!! :(

I've got a set in my Silvia and they are so much better than stock suspension. Car sits nice and flat through the corners and feels sharper. For me it was a good choice.

The D2s come in different sprin rates and different oil/gas and valving setups for Street, Track, Drift and Rally... I went with the streets and went 2kg lighter than the "standard" because NQ roads are not the best in some places... You would probably go harder springs and the correct type if you were going to use them for drift/circuit or rally (probably not in an skylines...).

Have a chat to your provider and they will get you the right stuff. Or have a look at the D2 website for all the details so you know what is available and what they say is standard for your car.

Cheers

Adrian

PS. Mine took about 500km to run in nicely. Before that they felt very hard and bouncy. Afterwards they were/are great.

Edited by Adrian Knack

Are D2 a well established brand?

They sponsor the CLK-GTR LM race car:

Mercedes%20CLK-GTR.jpg

From this sponsorship I always thought they were some high end Euro brand but these cheap coilovers seem to belie this theory.

coilovers eliminate some body body roll, camber/damper/highett, none of which kingsprings on a stock strut can do.

when i got some it got rid of alomost %50 of body roll. but if you arent going to the track or anything like that i dont see the point why you need them other than to say "hey look i have coilovers"

Thanks for the feedback guys... I will mainly be using them for street with a couple of track days a year thrown in for good measure. Anyone checked out the g4s?????? They look ok to but but would be cool if anyone has any in a car!!!!

Are D2 a well established brand?

They sponsor the CLK-GTR LM race car:

Mercedes%20CLK-GTR.jpg

From this sponsorship I always thought they were some high end Euro brand but these cheap coilovers seem to belie this theory.

3 things:

1. that photo is around 10 years old.

2. it's not the same D2.

3. from memory D2 Privat is a german phone company... i think.

:)

Some clarification;

1 Body roll should be controlled with the anti roll (stabiliser) bars, springs are there to hold the car up and absorb bumps. If you have a spring rate high enough to limit the roll substantially, it will be too high to absorb the bumps.

2. On a double wishbone car (like R32/33/34 Skylines) camber is adjusted via the control arms, not the shock/spring unit.

3. You can buy the Kings/Whiteline etc springs in the correct height

4. The Bilstein shocks in the Group Buy come with additional circlip grooves so that you can further fine tune the height.

5. R32/33/34 Skylines come with coil overs standard (the coil spring is located around the shock absorber, hence coil over)

Check out the Group Buy thread for more details, and some feedback from the 50 or so guys that have bought kits.

:happy: cheers :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...