Jump to content
SAU Community

Recommended Posts

Looking for a replacement for my rb20 turbo which is slightly or a fair bit bigger than the 20 turbo!

Not looking to spend alot as im simply replacing a blown turbo and it will only be a tuned on an safc!

Any info can b directed to [email protected]

Thanks all

Jaz

Ive got a highflow rb20 turbo on my car now. Im going to be looking at pulling it off soon to get something larger.

Its had about 10k kms on it, and it cost $1200 to highflow. It has larger steel wheels, and has been machined out to fit. Ive been told its sort of like a t3/t4 hybrid (but its still a rb20 highflow)

It makes similar power to a hks2530 i think, and has the same response as the std turbo has.

Im looking to sell it for around $950 (ono) so if your interested, let me know and we could work something out.

Pics below show turbo when i fitted it to my new motor. It runs fine, and has no shaft movement.

post-3692-1143514461.jpg

post-3692-1143514497.jpg

Edited by Bl4cK32

As i said in my PM Bl4cK32 im happy to take the turbo, just buzz me when its off the car. Anyone with any similar offers that have the turbo off the car is free to PM me aswell as cash can't exchange hands until he takes it off and is ready to send it to me!

Ended up deciding against that dude (after i made the thread hints the title... lol)

Looking for something simlar to the pictures of the hi-flowed unit above.

Thanks for the offer :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...