Jump to content
SAU Community

turbo timer


Recommended Posts

Andrew, It is possible to get a relay which allows you to lock the car with the engine still running, a few of the car audio places do it from memory. I just don't think they are necessary, but if your getting one done then I like the look of the Apexi one, small and unobtrusive.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-183808
Share on other sites

If you are doing moderate driving then you don't need to cool down the car at all, that's my point. If you thrash it then leave the engine running for about 2 mins. The best way is when your about 5 mins away from your destination, drive normally and the car will cool down by itself.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-183939
Share on other sites

Originally posted by Nizmo

Andrew check your insurance policy too because some insurce policies are void if you attach a turbo timer to your car because of the risks of it left running after an accident.

for that exact reason i thought they were illegal.. when you turn the key off, the car is suppose to turn off.

Shaun

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-185324
Share on other sites

Yes, I agree.

Turbo timers are a waste. Are only handy if you want to let it cool down by its self and you don't want to wait around.

I have a HKS type 1, that measures your speed, 1/4 times, rpm warning, rarara list goes on. I can sell it for $300 including delivering and harness. Never opened, if anyone wants it.

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-187527
Share on other sites

Most people with turbo timer's end up switching them off cause they don't want to wait while there car cools down enough to lock the car. If your racing then just leave the engine running long enough to take some of the sting out of the oil temp, other than that don't worry about it.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-187714
Share on other sites

Don't know about you guys, but i couldn't live without my turbo timer... I always leave the car running, even if its a casual drive down to the shops... My alarm work fine with the turbo timer... I switch the car off, press the button and she locks and then when the car switches off its immobilised...

In the mornings i use it to warm up the car... I start the car, turn the key off and set the turbo timer for 5:00 mins, lock the car and go back inside to finish getting ready... I'm no Captain Cold-Cane... :)

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-188087
Share on other sites

Originally posted by MetBlue_GTST

Don't know about you guys, but i couldn't live without my turbo timer... I always leave the car running, even if its a casual drive down to the shops...  My alarm work fine with the turbo timer...  I switch the car off, press the button and she locks and then when the car switches off its immobilised...

In the mornings i use it to warm up the car...  I start the car, turn the key off and set the turbo timer for 5:00 mins, lock the car and go back inside to finish getting ready...  I'm no Captain Cold-Cane...  :P

i do the same thing would be lost without it , i didnt have a problem with the timer and getting insurance

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-193404
Share on other sites

I've got one of the cyclops alarms that will allow the turbo timer to run while I activate the alarm system. It locks the doors when I press the button and as soon as the car stops running the immobilisor arms within 10 seconds. Even with a non thrashing drive for 15 mins to the shops and back with the air con on the timer reads at least 50 seconds to run... so I think they are worthwhile.

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-193488
Share on other sites

Are you able to find out what wire they cut?

They want to sell me a... "HKS Keylock release adapter"

for "..A$96 delivered to you"

Originally posted by GTS-t VSPEC

I think there is a solenod which stops you with drawing the key while the engine is going. Most places which install turbo timers cut one of the wires to prevent this happening.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/11097-turbo-timer/#findComment-196377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...