Jump to content
SAU Community

Recommended Posts

Hi there,

I’m selling a set of Rays Volk Racing GTP Daytona wheels, these came with my car and are now just lying around taking up space.

Details:

Location: Outer SE Suburbs of Melbourne

Style: They have a chrome outer rim with dark metallic blue spokes bounded by a red ring, the 8” rears have a little bit of dish.

Condition: Pretty good for the age (mid 90’s I reckon), they have the usual minor gutter rash and could use a good clean; otherwise they’re not bent or damaged.

Dimensions:

2 x 17x7 +29 offset, 114.3PCD, 5 stud with 225/45 R17 tyres – 90% tread

2 x 17x8 +32 offset, 114.3PCD, 5 stud with 235/45 R17 tyres – Not far off the wear indicators

Other: They come with locating rings, however one is missing so the purchaser will need to buy one (not expensive, available at any tyre store)

Suits: Skyline R32-R34 and probably heaps of others (S14, S15, Supra, 300ZX to name a few)

Please see the attached pictures to get an idea of the style (one pic shows what they looked like on my car before I purchased it).

SOLD!

Cheers,

Dave.

post-6494-1143265347.jpg

post-6494-1143265431.jpg

post-6494-1143265456.jpg

post-6494-1143265536.jpg

Edited by RaseR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...