Jump to content
SAU Community

Recommended Posts

Sau Nsw 400m Registry

DiRTgarage: 10.36 @134mph r32 gtr (two.06l stacey 11.95 @121 mph)

T04GTR: 11.7 @ 116mph r32 gtr

MR331307: 11.35 @ 125mph r33 gtst

DoughBoy: 12.0 @ 123.7mph White car r33 gtst

DoughBoy: 12.1 @ 119mph Black car r33 gtst

88silhouette: 12.119 @ 111mph r31 sil

qwikky: 12.3 @ 109mph r33 gtst

moanie: 12.504 @ 112mph r33 gtst

Morgs: 12.53 @ 111 mph r32 gtr

benm: 12.7 @ 112mph r32 gtr

mass iv: 12.91 @ 111mph r33 gtst

Guilt-Toy: 12.98 @ 108mph r33 gtst

race_snooze: 13.4 @ 111mph r33 gtst

yogi000: 13.1 @ 108mph r32 gtst

spx25t: 13.354 @ 103.23MPH r31 25t

PORTS: 13.433 @ 105.39mph z32 300zx

cerci: 13.522 @ 103mph r33 gtst

abo bob: 13.582 @ 103.93mph r34 gtt

silver gts-t: 13.62 @ 103mph r32 gtst

Shonen: 13.934 @ 97.4MPH r34 gtt

SECUR1TY: 14.003 @ ??? r33 gtst

nath95: 14.11 @ 97mph r33gtst

tomm0: 14.3 @ 98mph r33 gtst

raz0r$harP: 14.516 @ 95.98mph r33 gtst

sindows: 14.8 @ 96mph r33 gtst

evil_weevil: 15.0 @ 92mph r33 gtst

Will be updated regularly. :no:

hey silv...it appears that T04GTR and MR331307 need to swap spots

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...