Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...
  • Replies 224
  • Created
  • Last Reply

Top Posters In This Topic

im interested in the little plastic piece for the horn that is behind the steering wheel. im talking about the ring with the flat cable attached. mine is broken and these are pretty hard to find here in the US.

thanks

clay

have no radiator, front quarters or exhaust. all other parts must go this month. I still have engine, gear box and complete interior/exterior in top condition. the car is black

make me some offers!

pics can be sent on serious request when I have time. cheers

Looking for YOKE to go into R33 GTS 25t gearbox.

Will take whole tailshaft if necessary, but only need front section.

Email me on [email protected]

Thanks,

Dennis :ghost:

  • 4 months later...
have no radiator, front quarters or exhaust. all other parts must go this month. I still have engine, gear box and complete interior/exterior in top condition. the car is black

make me some offers!

pics can be sent on serious request when I have time. cheers

Man looking for the driver's side window panel, i'm been broken into.

How much for it, i can cover COD.

The window panel is sold - these are the parts I have left guys....

REAR BRAKE SET

STARTER MOTOR

MASTER CYLINDER/BRAKE BOOSTER

IGNITOR MODULE

ECU

CASTOR RODS (PAIR)

FRONT LEFT LOWER CONTROL ARM

AIR CON CONDENSOR

HVAC FAN BLOWER

HVAC UNIT (HEATER CORE, NO LEAKS)

PEDAL SET

PETROL TANK

GLOVE BOX

DASH PAD

CENTRE CONSOLE WITH LID

R + L DOOR TRIM (NO DRIVER SWITCHES)

R DOOR

R MIRROR

STEERING COLUMN COVER

BOOT RELEASE CABLE

BONNET RELEASE

FUEL PUMP

OUTER PILLAR TRIM

FRONT HUBS

PRESSURE PLATE

ENGINE WIRING

WIRING LOOM

POWER STEERING RACK

STEERING COLUMN

REAR ‘SKYLINE’ SIGN

TOW HOOK

ALL SEATS

R REAR QTR PANEL

L REAR QTR WINDOW

CARPET

FRONT WIPER MOTOR

REAR WINDOW

SIDE INDICATORS

SPOILER

DIFF

INTERIOR LIGHTS

INTERIOR PANELS

OTHER SMALLER BITS AND PIECES

My no. is 0401 598 511

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...