Jump to content
SAU Community

Recommended Posts

i have a ticking noise coming from something in the engine bay.

sounds like its coming from the passenger side of the car towards the front of the engine.

its louder on start up but gets a bit softer after a 10 seconds of running but i can still hear it.

any idea's before i take it to someone to get looked at end up paying for things i dont need?

thanks

ash

Link to comment
https://www.sau.com.au/forums/topic/112010-i-have-a-ticking-noise-help-please/
Share on other sites

Cold or Warm starts?

Could be the lifters just getting their first sqiurt of oil for the day.

Alternativly, the stock injectors are pretty damn loud on RB's?

Could also even be the fan hitting against a pipe (in my case FMIC) or wire thats loose?

Has your timing belt been changed; or alternaviely how many (genuine) kms has the car done?

btw:- bring it out on the next sthn SA crusie!

Edited by Tangles

i had a similar noise with my series2 not long after a long trip recently so got the belts all done on the front including the timing belt just to be sure and noises all gone now, all the drive belts were cracked an mechanic said it sometimes happens cos of the chemicals they spray the cars with when they de-bug them for quarantine?.

must react with the rubber i spose.

timing belt was done very recently

its on both warm and cold starts

fan clears the cooler pipe... just :D

i took it to my local mechanic today and he thinks its the exhaust manifold gasket. sound right to you guys?

"Just"

Theres your issue

Paint some black paint on your pipe, then start it and see if it rubs any of the black paint off.

I know because my pipes are painted black and the paint gets taken off. Put some sandpaper there to wear it down.

no it isnt that.

it clears. that was the first thing i thought it was.

there is a 5 mm gap

ive grabbed the pipe and pulled it up away from the fan and its still there. ive also pushed the pipe down and it still doesnt quite touch the fan, its braced quite solid.

I'll be doing the same when i get my turbo high flowed, i had a nut missing off my exhaust manifold, Doesn't seem to be leaking but will pull it all off and replace the gasket just to be sure.

  • 3 weeks later...
I'll be doing the same when i get my turbo high flowed, i had a nut missing off my exhaust manifold, Doesn't seem to be leaking but will pull it all off and replace the gasket just to be sure.

I head a similiar noise that begun just after I had my cat off and on. I hunted it down to 3 nuts and studs missing from my exhaust manifold! I dunno where they went, car is an unmodified import. I guess the stress on manifold of me playing around with cat made it start to leak.

Why are other peoples exahust manifolds missing bolts too? Seems odd to me. Suppose I'll have to pull it to bits now!

what oxford1327 said interests me, ie the chemicals sprayed on to decontaminate the car. As mentioned in "electronic rust prevention" the undersides of my S1 ar veiled in a film of rust (corrosion). Especially the bits that were cad plated.Apart from having a flat battery yesterday this rust is the only thing that isses me off.

Its going to cost $640 at Endrust to get it fixed.

what oxford1327 said interests me, ie the chemicals sprayed on to decontaminate the car. As mentioned in "electronic rust prevention" the undersides of my S1 ar veiled in a film of rust (corrosion). Especially the bits that were cad plated.Apart from having a flat battery yesterday this rust is the only thing that isses me off.

Its going to cost $640 at Endrust to get it fixed.

Odd - mine is completely rust free underneath - pefect! Nor have I found any ceramic bits as yet... as yet!

I've got the same noise in my series 1. Stock injectors are noisey. Seems to be a nissan thing, the ones in my sr20 wern't much quieter. But i have also noticed that the boost control solernoid is also a bit noisey.

There are pollution control solenoids which ticker away - best solution is to rubber mount them. However these are at the back of the motor and not the front, so I could be sending you on a rabbit hunt.

  • 1 month later...

Though not a Stagea Tick, but still Nissan.

Gave the S13 an oil change and this time changed the filter and changed the plugs. Put in the required amount

of oiland on start up a diabolical tick. More like an elf with a sledge hammer. The boys thought some foreign body got in thru a plug hhole, etc etc etc. Every time it started, tick,tick wtf.

The oil light didn't come on an the ECU was checked. Nope.

In desperation I put a bottle of Nulon in. The effin tick Stopped. Why.

My thought is that somehow the oil pump got an air lock and maybe the extra bit of lubricant helped it pick up properly. I have never experianced any5thing like this in 50yrs of oil changing, and we have changed the S13 and 180sx drifters many times before with no probs.

After the noise went away, the car was taken for a thrash up toBrissie and the next day was flogged a bit at

Queensland Raceway.Runs sweet as a nut.

Has anybody experienced this type of problem? The guys on Sil had no ideas.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...