Jump to content
SAU Community

Cold Air Box


Recommended Posts

Ok, I'm sure its been posted a hundred times b4 but since I got no luck from the other forums i'll try again.

Does anyone have a template (or even some decent instructions) to build a cold air box around my pod filter.

I'm pretty mechanically challenged so if anyone has some good tips, that would be great.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/11220-cold-air-box/
Share on other sites

mate its pretty easy to make one from the aluminium foil backed foam from clark rubber. $23 per m.

After you cut that stuff out to fit, you have a template for a metal one should you want it to look pretty, or you could just cover the foam one with fibreglass resin and paint it.

The foam is a fantastic heat shield.

Link to comment
https://www.sau.com.au/forums/topic/11220-cold-air-box/#findComment-188304
Share on other sites

Lojikl,

If scissors & tinsnips aren't too challenging, read on..

Make a template around your pod from cardboard, ensuring that the corrugations are vertical. trim it so when u close the bonnet there is say 1/2 - 1 inch clearance. Then at intervals of about 1/2" around the top edge insert 2" brads ( small bullet head nails) where your template meets the bonnet. GENTLY close the bonnet - pushing the brads further into the cardboard. You now have a PERFECT profile ! carefully remove your template, carefully unfold it, trace it onto sheet alloy, play "connect the dots" - to get the top edge & hey presto - full sick, custom, and SEALED. BTW the best stuff for the top edge is neoprene pipe lagging - same stuff used on air-con lines. $2.50 a metre from Clark rubber !!

I've done 3 like this on different cars & it's simple - just takes time...

here's my Proton GTi..

note the neoprene has taken the shape of the bonnet... airtight !!

Link to comment
https://www.sau.com.au/forums/topic/11220-cold-air-box/#findComment-188396
Share on other sites

Originally posted by JiMiH

And Jay: I don't suppose your template would fit an R32 would it?

Are R33s and R32s the same in that area? [/quoteJ

JiMiH - naaa, totally different. They look the same until you hold the template upto the R32 then you just scratch your head :)

J

Link to comment
https://www.sau.com.au/forums/topic/11220-cold-air-box/#findComment-189144
Share on other sites

Guest KILLER-T

and one from the top so you can get a idea on the size of it and for cold air induction i just let it suck cold air through the holes were the factory I/C pipes went through. i tried some of that silver flexi duct but once i reached 1bar it would start to fold up and become restrictive

Link to comment
https://www.sau.com.au/forums/topic/11220-cold-air-box/#findComment-191247
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...