Jump to content
SAU Community

Recommended Posts

  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

Ok i am really interested but dont know jack. Appreciate if you could answer these questions to help us ignorant fools.

I have a pretty much stock R33 series 2. Which of these HID kits are suitable? I dont mind a slight blue tinge if its nice just so long as they are bright and white. So whats suitable for my car?

Why so cheap compared to kits i've seen advertised here for $800+ ??

Do they require any other parts or work to install that cost a significant amount? If so what is required?

Do they illuminate better than the stock lights? Not talking about colouration... road illumination. ?

As i said, very very interested, but need answers..

Hi.

1, if u want white colour . just go 5000K or 6000K, or if a bit blue then go 8000k they will fit ur car for sure

2, Directly from factory, no need to pay for the marketing, advertising, stuff, and office renting fees for the companies.

3. nop. but projector lens is prefered but not must

4. they way much better. i already used to hid lights and now if i drive anyother car with out hid i feel the lights so weak.

Ok put me down mate...H1 kit for my R33 S2. The only thing to work out now is do I go for 6000K or 8000K, I like the bluey tint and from what I can tell 6000K does have a blue tinge to it, 8000K is way more though is that right? What would you recommend?

Dont want cops on my ass regarding xenons.

EDIT: Put me down for 6000K x 1 kit. H1.

Edited by Sir-D

Thanks alot for your reply bankids.

So i need H1 for my R33 series 2? Series 2 has dual headlights so what impact does that have on this? I need 2 sets? ie i dont want my lights on and half the headlight enclosure looks white and the other half yellow.. ? Sorry, like i said, im a real noob.

I read the original WA thread cover to cover, didnt notice an install guide....

Very keen just wanna get my head around things.

Thanks alot for your reply bankids.

So i need H1 for my R33 series 2? Series 2 has dual headlights so what impact does that have on this? I need 2 sets? ie i dont want my lights on and half the headlight enclosure looks white and the other half yellow.. ? Sorry, like i said, im a real noob.

I read the original WA thread cover to cover, didnt notice an install guide....

Very keen just wanna get my head around things.

You dont use both of your headlights to light up the road with low beam... the outer ones light up with low beam, the inner ones are high beam... when you high beam the outer low beams switch off.

The H1 is for the outer low beams. Also you wont be needing high beams anymore as HID will take care of it.

here is that thread from WA:

H1_HID_Kit_Installation.doc

Hi eric.

coz this time 20 dollars express fee is added in the price and for the h4 hi/low . sry gave the wrong price for a long time .the h4s are 100 dollars higher than normall ones

the hi/low works with one bulb

the bulb is driven by a small motor in the bottom of the bulb base. the motor drives the bulb moving up n down to switch hi and low beams.

Whatdo you mean i wont be needing high beams anymore? If these HID globes that will replace my outer low beam bulbs are that powerfull and illuminate that far/bright, wont they piss off everyone i drive past at night?

Apparently not if you adjust them properly... these HIDs should be bright enough not to use high beam and frankly high beam on my R33 kinda blows...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...