Jump to content
SAU Community

Recommended Posts

Hi all, just after a bit of advice. I am looking at buying a new T70 turbo from XS Power for my s1 r33 gts-t and was wondering if it was worthwhile. Whats it like compared to a t3/4? I will be buying this with a top mount manifold and 38 mm external wastegate. My car is pretty much stock atm except for a 3" turbo back exhaust and pod so I want to know what sort of power increase I would be looking at.

The specs of the turbo are:

OIL COOLED

GARRETT INTERNALS

WET FLOATING BALL BEARINGS

SHAFT & WHEEL TRIM 64.5MM

COMPRESSOR WHEEL SUPER 70 60.5MM

TURBINE HOUSING A/R .84

COMPRESSOR HOUSING A/R RATIO .70

V-BAND FLANGE

Thanks for your time.

Edited by the_barman82
Link to comment
https://www.sau.com.au/forums/topic/112316-t70-turbo-anyone-used-one/
Share on other sites

The real reason I want to get this is cuz I somehow sucked something into my turbo before and blew it so now the car is just gathering dust in the garage.

By T3/4 I mean a T3/T4 hybrid, high flowed T3.

to get the benefit out of it you need a fair list of suppporting mods otherwise its not a safe tune and youll just hit stupid limits. im gonna write up a turbo upgrade faq. we get these questions weekly, the same thing over, no one bothers to search

' date='4 Apr 2006, 05:04 PM' post='2070855']

WHAT is a t3/4 turbo?

a random bucket of sh|t from the mid 90's taht the VL boys love to use as its cheap.

Get a proper Garrett/HKS turbo IMO.

They are designed for each specific use.

While it will make power, and probably blow your motor up without (as also stated) a lot of other modifications... they dont work as well as something that has a setup in mind.

First you need to set a power goal

Second you need to workout the mods that you will need to support that power goal

Third - Use the search button as your goal (im sure) is covered already

The T70 turbo from XSpower / SSautochrome is CRAP!! to say the least!

The one i had blew after a short time. NOT thrashing it! Sent it to my turbo company, they took it apart.. NO ball bearings, assembled like crap. some KKK parts, NO garret parts.

Stay away from it, and buy a turbo from a know company.

a random bucket of sh|t from the mid 90's taht the VL boys love to use as its cheap.

Get a proper Garrett/HKS turbo IMO.

They are designed for each specific use.

While it will make power, and probably blow your motor up without (as also stated) a lot of other modifications... they dont work as well as something that has a setup in mind.

First you need to set a power goal

Second you need to workout the mods that you will need to support that power goal

Third - Use the search button as your goal (im sure) is covered already

As you may have devised from my name I am but a lowly barman with very limited funds. I am not after any huge power gains and the only reason I wanted to but these things is its only $400 US for the lot. Of course I will be buying a fmic, power fc, pump, injectors etc one day but until then I just want to get the car back on the road. I will be keeping it a low 8-9 psi boost until properly tuned to keep it reliable.

The T70 turbo from XSpower / SSautochrome is CRAP!! to say the least!

The one i had blew after a short time. NOT thrashing it! Sent it to my turbo company, they took it apart.. NO ball bearings, assembled like crap. some KKK parts, NO garret parts.

Stay away from it, and buy a turbo from a know company.

ARGH!! Damn I wish I wouldn't rush into things!! I have already bid for it and have only 3 hours left for someone to bid higher. Looks like I just committed turbo suicide before I even started the car.

dang :P

if you bolt it on it will probably be ok but i expect a fair chunk of lag and excess airflow protection to kick in fairly quickly. its a fair bit of work to bolt it on given its an manifold change and likely your afm stuff wont mate up and dump pipe probably wont either

Desperation will do funny things to a man. So will a 60 hour week with a total of 10 hours sleep. Bars suck. Guess I will have to find out if it all bolts up when it arrives, my mech mate will have to do the lot as I have to work. He will tell me in no uncertain terms what is required before I can toss my backup car and actually drive my baby. Thanks heaps for the advice guys, will stay updated when possible, back to work I go. :P

hmm sounds interesting

keep us posted on how this new turbo goes on stock boost without the supporting mods... i wonder if your car will be able to handle it?

hope so.... cos i was about to make the same mistake before a while ago

goodluck barman

Did you read his post?

He has a stock motor, and stock parts mostly...

Bringing up a 350rwkw application that will cost you nothing short of $15,000 is totally irrelevant.

And its also a bit hard to say "they arent crap" when you havent yet posted a dyno graph :D

If you did (in the dyno results thread) we could see where its making boost and those sorts of things, but it would make his car one thing

slower

DAMMIT!! Looks like I have to fork out the $400 US for the super t70. Gee, always wanted a dust collecting car and a big turbo for a book stand. Might have to chase the bank for a loan. Oh and I would love to have used my stock turbo but unfortunately its gone to boosted hell. Foreign objects suck especially when it will cost upwards of $1400 to fix.

cheers for the help and advice guys, gonna have to lose an arm or something to get compo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...