Jump to content
SAU Community

Recommended Posts

So what makes you think the 4wd is not working then ??

The R32 will slide the back out when doing ..err... spirited driving .

If you are expecting it to handle like a WRX , ie. fairly neutral then you will be mistaken.

It will also spin the rear tyre a bit then the gauge should shoot up as the front engages on a savage launch.

If it is very slow to rise or only rises a bit , it may need bleeding or at worst the clutch packs may be gone in the transfer case.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2075147
Share on other sites

Jay, As Ken points out the GTR isn't a constant 4WD system, it's active, and transfers torque to the front wheel when the rear starts slipping. If in doubt take it to one of the import workshops and I'm sure they'll tell you if it's working ;)

ATTESSA is a reactive system, so it is only ever going to try & catch up with what you are doing.

It can be air in the system, but it also (Don't want to alarm you) can be due to wear in the ATTESSA clutch plates. When these gets tired the system still apportions torque (or tries to) by using the same clamping pressure as before, but it no longer works properly because the wet clutches slip more than they are supposed to.

Best bet is to get the system bled, then check it by a back to back test with a known good unit.

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2075658
Share on other sites

Thanks for the replys. I know that the gtr 4wd isn,t constent like a wrx but when i try to do a launch at 5000 rpm it just spins the back tires, also when the car gets full boost in second gear at 5000 rpm it spins the tires all the way to 7000rpm. I've noticed as i have been driving when it usally spins in second gear at 5000rpm it got full traction 4 times. So do you guy's think it the ATTESSA clutch plates?

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2076211
Share on other sites

It could be the clutch plates, or the system may need bleeding. Best to take it to a good workshop to get the system bled, if that doesn't work then you may need new clutch plates, but that won't be cheap.

How much do u think it may cost??

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2076476
Share on other sites

this thread reminds me that my 4wd aint worked since i had my gtr imported lol my warning lights are on all the time and nothing reads on the front torque guage and yes i have checked the fuses and they are ok

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2076486
Share on other sites

The two issues (Gazza's & gaygtr's) are diferent.

Gazza - yours sounds for all the world like an electronic problems - in which case the ATTESSA module under the parcel shelf should be blinking away trying to tell you what is wrong.

JayGT-R's is, like has been said, either a bleed issue in the attessa or worn clutch packs. Take it to someone who knows the systems & just as importantly knows what to expect from the ATTESSA system in terms of performance.

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2077946
Share on other sites

The two issues (Gazza's & gaygtr's) are diferent.

Gazza - yours sounds for all the world like an electronic problems - in which case the ATTESSA module under the parcel shelf should be blinking away trying to tell you what is wrong.

yeah it is flashing i will get around to getting it seen to eventually

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2079370
Share on other sites

Yes how did u know?

The guy says he wasn,t aware of the problem.

get some pics up!!! this thing sounded like it had some gear on it. have you found out what turbos are down there?

i spoke to the owner for around half an hour on the phone cause i was going to drive down there to see it. i asked him about the faults on the car (to save me driving 3 hours and being pissed off) and the first thing he said that it was only running the rear wheels. he even said that he had got quotes from a workshop in bunbury to fix. wasnt aware? pfff no way!

seemed to be going for a good price too :)

Link to comment
https://www.sau.com.au/forums/topic/112528-4wd-not-working/#findComment-2082296
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...