Jump to content
SAU Community

Clutch-nismo Gmax Twin Plate 2nd Hand

Tyler Durden
 Share

Recommended Posts

Tyler Durden Contributor

Tyler Durden

Posted
  • Author
Posted

from R32 GTR, couldn't tell you k's, dont know how much meat is on it (dont know my way around a clutch too well). more then willing to measure something or take more photos if someone can tell me what specifically to do.

Tyler Durden Contributor

Tyler Durden

Posted
  • Author
Posted

Clutch was removed because it was slipping on hill starts. from an 89 GTR. I am in Perth. I was unaware that I had such a decent clutch in, would have considered rebuilding it (if thats the right terminology) but it was replaced before I could make the decision. Mechanic said I could get $$$ for it so thats what I am trying to do. If you hadn't noticed I know very little about clutches. I don't know if it would fit in a gtst.

why was the cluch removed and where abouts are u located.

and year model GTR it came out of

  • 2 weeks later...
ZILR-34 Experienced

ZILR-34

Posted
Posted

"Clutch was removed because it was slipping on hill starts" LoL who's goin to buy a slipping Clutch for $400 when u can get a new H/D for $6-700

DMD Apprentice

DMD

Posted
Posted
"Clutch was removed because it was slipping on hill starts" LoL who's goin to buy a slipping Clutch for $400 when u can get a new H/D for $6-700

because you could get this fully rebuilt for around $500-$600 and you'd have a clutch that would out last a new Exedy HD one priced at $700 by a long shot.

brand new this clutch would sell retail for close to $1800 if not more..

it'd bite like a mofo too great for those with a lot of power going through clutches every 6 months

XSKAPE Community Regular

XSKAPE

Posted
Posted
because you could get this fully rebuilt for around $500-$600 and you'd have a clutch that would out last a new Exedy HD one priced at $700 by a long shot.

brand new this clutch would sell retail for close to $1800 if not more..

it'd bite like a mofo too great for those with a lot of power going through clutches every 6 months

Where can you get this clutch rebuilt for $500-$600?? Would love to know.

33GTT Collaborator

33GTT

Posted
Posted
Where can you get this clutch rebuilt for $500-$600?? Would love to know.

So would I,, I have one and the average quote I got to overhaul it was $1400,,

The cheapest I could get replacement genuine plates for it was US$300 each + delivery from Japan,,

So If we could be filled on on where these could be overhauled that cheap,, I know I'd be keen to get mine done,,

lol

cheers

John

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...