Jump to content
SAU Community

Recommended Posts

Buy the highest RON rated fuel you can, rather than buying the lower-spec stuff and octane boost it. Octane booster doesn't mix in to the petrol properly, and its only ever designed as a stopgap measure.

If you've tuned your street car to use fuel with a higher RON than what you can easy get at your local petrol stations, then I'd suggest re-evaluating your requirements or purpose of your vehicle.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105035
Share on other sites

Buy the highest RON rated fuel you can, rather than buying the lower-spec stuff and octane boost it. Octane booster doesn't mix in to the petrol properly, and its only ever designed as a stopgap measure.

If you've tuned your street car to use fuel with a higher RON than what you can easy get at your local petrol stations, then I'd suggest re-evaluating your requirements or purpose of your vehicle.

hi,

what you say makes sense but in this case in australia,I think most skyliners are using Optimax and that's only 98ron.. I think it's 101 in japan(i could be wrong though). And as for the new fuel made by shell which has a bit of ethanol (but has high octane rating),i'm trying to see if it makes sense to safely use optimax + octane boosters.

what are your thoughts?

thanks

rob

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105076
Share on other sites

If your car has a stock ECU it will run fine on 98 Octane. If you want to use an ethanol blend from what I understand the fuel density is different & you need a tune.

If you have an aftermarket ECU get the engine tuned to 98 Octane.

By way on illustration - when they sold the R32 GT-R's in Oz you could only buy 95 Octane...

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105104
Share on other sites

what you say makes sense but in this case in australia,I think most skyliners are using Optimax and that's only 98ron.. I think it's 101 in japan(i could be wrong though).

Oh, a stock Skyline, or one without a programmable ECU. I hadn't considered that. :(

If the car's stock, then it should be adequate. 101RON would be top-of-the-line fuel; OEMs always design their cars for a wide range of conditions.

If its got a Mines' ECU or something that's tuned more aggressively but can't be retuned locally, I'd probably look at swapping the ECU and retuning instead. I don't like octane booster since there's no guarantee it mixes properly, so I'll avoid it where I can.

I don't think it was designed as a long term solution.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2106282
Share on other sites

If im going out for a fast cruise with the boys, i try the Nulon Pro octane boost which brings my knock levels down. This is on top of my 98 octane fuel. However, i prefer to fill it up on Optimax Extreme which is 100 octane and brings my knock down considerable.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2106835
Share on other sites

  • 3 weeks later...
If im going out for a fast cruise with the boys, i try the Nulon Pro octane boost which brings my knock levels down. This is on top of my 98 octane fuel. However, i prefer to fill it up on Optimax Extreme which is 100 octane and brings my knock down considerable.

hang on... i thought with Optimax, your car shouldn't knock anymore?

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2156957
Share on other sites

a higher RON is just a higher resistance to preignition (knock).

tune your car to 98RON (Ultimate, Optimax, Vortex, Synegy) and add a octane booster if you want when you venture to the track or go for a fast cruise with the boys just as an added safety factor. otherwise yeah, "re-evaluate your requirements of your vehicle"

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2157096
Share on other sites

a higher RON is just a higher resistance to preignition (knock).

tune your car to 98RON (Ultimate, Optimax, Vortex, Synegy) and add a octane booster if you want when you venture to the track or go for a fast cruise with the boys just as an added safety factor. otherwise yeah, "re-evaluate your requirements of your vehicle"

hi,

i'm in melbourne. A few months ago,i enquired and found that Caltex has yet to have 98 ron fuel in melbourne. Seems their Vortex are 95 or something. Has anything changed?

thanks

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2167733
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...