Jump to content
SAU Community

Recommended Posts

Buy the highest RON rated fuel you can, rather than buying the lower-spec stuff and octane boost it. Octane booster doesn't mix in to the petrol properly, and its only ever designed as a stopgap measure.

If you've tuned your street car to use fuel with a higher RON than what you can easy get at your local petrol stations, then I'd suggest re-evaluating your requirements or purpose of your vehicle.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105035
Share on other sites

Buy the highest RON rated fuel you can, rather than buying the lower-spec stuff and octane boost it. Octane booster doesn't mix in to the petrol properly, and its only ever designed as a stopgap measure.

If you've tuned your street car to use fuel with a higher RON than what you can easy get at your local petrol stations, then I'd suggest re-evaluating your requirements or purpose of your vehicle.

hi,

what you say makes sense but in this case in australia,I think most skyliners are using Optimax and that's only 98ron.. I think it's 101 in japan(i could be wrong though). And as for the new fuel made by shell which has a bit of ethanol (but has high octane rating),i'm trying to see if it makes sense to safely use optimax + octane boosters.

what are your thoughts?

thanks

rob

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105076
Share on other sites

If your car has a stock ECU it will run fine on 98 Octane. If you want to use an ethanol blend from what I understand the fuel density is different & you need a tune.

If you have an aftermarket ECU get the engine tuned to 98 Octane.

By way on illustration - when they sold the R32 GT-R's in Oz you could only buy 95 Octane...

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105104
Share on other sites

what you say makes sense but in this case in australia,I think most skyliners are using Optimax and that's only 98ron.. I think it's 101 in japan(i could be wrong though).

Oh, a stock Skyline, or one without a programmable ECU. I hadn't considered that. :(

If the car's stock, then it should be adequate. 101RON would be top-of-the-line fuel; OEMs always design their cars for a wide range of conditions.

If its got a Mines' ECU or something that's tuned more aggressively but can't be retuned locally, I'd probably look at swapping the ECU and retuning instead. I don't like octane booster since there's no guarantee it mixes properly, so I'll avoid it where I can.

I don't think it was designed as a long term solution.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2106282
Share on other sites

If im going out for a fast cruise with the boys, i try the Nulon Pro octane boost which brings my knock levels down. This is on top of my 98 octane fuel. However, i prefer to fill it up on Optimax Extreme which is 100 octane and brings my knock down considerable.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2106835
Share on other sites

  • 3 weeks later...
If im going out for a fast cruise with the boys, i try the Nulon Pro octane boost which brings my knock levels down. This is on top of my 98 octane fuel. However, i prefer to fill it up on Optimax Extreme which is 100 octane and brings my knock down considerable.

hang on... i thought with Optimax, your car shouldn't knock anymore?

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2156957
Share on other sites

a higher RON is just a higher resistance to preignition (knock).

tune your car to 98RON (Ultimate, Optimax, Vortex, Synegy) and add a octane booster if you want when you venture to the track or go for a fast cruise with the boys just as an added safety factor. otherwise yeah, "re-evaluate your requirements of your vehicle"

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2157096
Share on other sites

a higher RON is just a higher resistance to preignition (knock).

tune your car to 98RON (Ultimate, Optimax, Vortex, Synegy) and add a octane booster if you want when you venture to the track or go for a fast cruise with the boys just as an added safety factor. otherwise yeah, "re-evaluate your requirements of your vehicle"

hi,

i'm in melbourne. A few months ago,i enquired and found that Caltex has yet to have 98 ron fuel in melbourne. Seems their Vortex are 95 or something. Has anything changed?

thanks

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2167733
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...