Jump to content
SAU Community

Recommended Posts

Hey,

Have 2x Z32 AFM's & also have 4x Q45 AFM's.

All in perfect condition and come with plugs.

Z32 AFM with plug = $250 + postage

Q45 AFM with plug = $330 + postage

Send me a PM for details and pictures.

located in Adelaide can do COD if you would like or pick up.

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/
Share on other sites

mate, you need to retune once you fit... you would benifit from it though only if you have aftermarket ECU or a remap (like me :worship: )

Are these new or used? Condition? PM me please...

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/#findComment-2119016
Share on other sites

hi mate whats the difference between the z32 and the Q45 afm, I have a turbo r33 with cooler, exhaust, bigger turbo, fower fc etc. dont know much about afm's

Luke

Im guess from your mods that would would be pushing somewhere from 180rwkw upwards.

Thats a guess as i dont know what turbo your running.

The standard AFM runs out of puff about the 180rwkw-200rwkw and as you have a power fc it should have a premade setting on it so just tell it you now have a z32 afm and it will adjust the readings. This should allow you to drive the car around from day to day, but a tune could still help perfect the A/F mix.

The main difference is that the Q45 AFM can read more power than the Z32 but depending on what power your aiming for you may only need the z32AFM. Both are the same size but the Q45 reads and can produce more power.

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/#findComment-2119129
Share on other sites

  • 4 weeks later...
Hey,

Have 2x Z32 AFM's & also have 4x Q45 AFM's.

All in perfect condition and come with plugs.

Z32 AFM with plug = $250 + postage

Q45 AFM with plug = $330 + postage

Send me a PM for details and pictures.

located in Adelaide can do COD if you would like or pick up.

any more z32 afm available? if so how much for one posted to 2110 nsw?

cheers

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/#findComment-2197459
Share on other sites

Have a mate (Dan - Marjinal) who is actually on this forum who needs a Z32 one ASAP (he is currently off to Adelaide to drift) with mine off my Zed so we need another asap. PM your contact details etc and I will grab one of these (provided you have one left) from you on Monday (I am unfortunately off with the bloody Army for the W/E).

MattB

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/#findComment-2202581
Share on other sites

GDay, Im posting for a friend (who is a member, but without internet at the moment). He needs a Q45 asap. Are these new or used? If new or in excellent used condition, he'll grab one off you with postage to Brisbane.

Thanks,

Shaun

0414972596

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/#findComment-2202972
Share on other sites

GDay, Im posting for a friend (who is a member, but without internet at the moment). He needs a Q45 asap. Are these new or used? If new or in excellent used condition, he'll grab one off you with postage to Brisbane.

Thanks,

Shaun

0414972596

I got in contact with him ,all sorted,

cheers

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/#findComment-2204924
Share on other sites

3. Please pay atention to pic 3 as you can see the person has broken off the plastic clip around the pins, the pins are still in perfect condition and a plug still fits straight on with no problems, but can slide off if pulled on hard.

post-27843-1148638865.jpg

post-27843-1148638905.jpg

post-27843-1148638938.jpg

Link to comment
https://www.sau.com.au/forums/topic/114824-z32-afm-q45-afm/#findComment-2205628
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...