Jump to content
SAU Community

Recommended Posts

On saturday morning i changed my sparkies. Ive done it before its a pretty standard proceedure. Had BCPR7ES's before, put in 4 BCPR7ES's and two BCPR7ES-11 regapped at 0.8mm. So, they were all at 0.8mm.

Car felt a lot better on power, went out that night, lots of revving etc, car was great. At the same time i also cleaned the coilpacks with some contact cleaner.

So sunday night the car started to develop a stutter. It is not R&R. It is not a misfire, rather it is as the car is being shuffled (like a DJ does a record) while still accelerating.

The reason that i even mentioned the spark plugs is that this is the only thing thats changed in the last few days.

Link to comment
https://www.sau.com.au/forums/topic/114881-car-stutter-on-boostwot/
Share on other sites

On saturday morning i changed my sparkies. Ive done it before its a pretty standard proceedure. Had BCPR7ES's before, put in 4 BCPR7ES's and two BCPR7ES-11 regapped at 0.8mm. So, they were all at 0.8mm.

Car felt a lot better on power, went out that night, lots of revving etc, car was great. At the same time i also cleaned the coilpacks with some contact cleaner.

So sunday night the car started to develop a stutter. It is not R&R. It is not a misfire, rather it is as the car is being shuffled (like a DJ does a record) while still accelerating.

The reason that i even mentioned the spark plugs is that this is the only thing thats changed in the last few days.

coil packs or wet/dirty afm

I did the same thing as that once. I changed the plugs, put contact cleaner on the coils and the car did the same as yours until i bought new coils. I think it may have been the contact cleaner shrinking the rubber boots or something.

Check the coils :huh:

Pretty much answers your question then.

try iridium BKR6EIX, B7 sounds like to hot a plug unless you run 20psi.

On saturday morning i changed my sparkies. Ive done it before its a pretty standard proceedure. Had BCPR7ES's before, put in 4 BCPR7ES's and two BCPR7ES-11 regapped at 0.8mm. So, they were all at 0.8mm.

Car felt a lot better on power, went out that night, lots of revving etc, car was great. At the same time i also cleaned the coilpacks with some contact cleaner.

So sunday night the car started to develop a stutter. It is not R&R. It is not a misfire, rather it is as the car is being shuffled (like a DJ does a record) while still accelerating.

The reason that i even mentioned the spark plugs is that this is the only thing thats changed in the last few days.

BCPR7ES's are what SK reccomeded.

I run a street tune of 11psi on an untuned engine thou.

I just realized a few more symptoms the other night. For some reason i had massive boost spiking, so I am going to cut the EBC out of the equation and go to actuator spring pressure for a while (which is what the EBC is set to anyway).

BCPR7ES's are what SK reccomeded.

I run a street tune of 11psi on an untuned engine thou.

I just realized a few more symptoms the other night. For some reason i had massive boost spiking, so I am going to cut the EBC out of the equation and go to actuator spring pressure for a while (which is what the EBC is set to anyway).

Hi Alex, is that with the high flow turbo on? If so, this is what I would do;

1. Check the installation, make sure no loose wires or untightend bolts

2. Get the boost under control

3. Maybe reduce the gap down to 6.5 mm, if you find nothing else wrong

4. Regarding the plug heat range, I use 7's on tuned engines running more than 1 bar. Which would be the case if you had the high flow up to 1.3 bar and had it tuned. Until you up the boost and get it tuned, it may be better off with 6's.

:( cheers :D

When I was in the car, it felt like a slipping senstation.

Like if it was a manual, somebody was slipping the clutch a little, several times a second.

It's quite strange and not like anything I've felt before.

It's not a popping from the plugs, but that doesn't rule them out.

Its also definently R&R unless the Stag engine does that 3-4 times a second....

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...