Jump to content
SAU Community

Recommended Posts

Hello,

have done a search and couldnt find what i was looking for. Have just purcahsed a head uni for my r34 (Pioneer DEH-9650mp) but am not sure if i should give a shot installing it myself or get someone else to do it. I found a diy guide on r34gtt.net regarding how to remove the particular bits in order to remove and replace the old head unit with the new one and single din unit however it doesnt say anything about wiring it up. Is it as simple as removing a few wries/plugs from the old head unit and putting them into the new deck or is it a little more complicated? i paid a fair bit for the new deck so dont wanna bugger it up, thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/114946-head-unit-into-r34/
Share on other sites

you'll have to cut and solder in the new deck's wiring loom to the original audio plugs. shouldn't take you more than half an hour to fit it.

I have a diagram of the later model pinouts (from an S15,but the positions are the same) that I can dig up if you want it.

Justin...

actually DON'T chop the connector off. buy a late model nissan adapting plug and match the colors. easier and less stressful/ have them here $15. you will also need and antenna adapter as that one is the 2pin nissan item.

Edited by Chris Rogers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...