Jump to content
SAU Community

Recommended Posts

recently my car has tis prob!!! very weird!!!! i was driving suddenly then my car engine turned off!!!!!

im sure i didnt stalled it with mt clutch control oh anyfink!!!! and plus it usually turned off at around 20km/hr n around low ref

it doesnt turned off like on the normal speed or on the freeway!!!!

is that means major prob to my car or jst maybe some unscrew switch left behind needs to screw back?

is dyno tune might affected it in somehow? coz it has never happened b4 bt after i jst had my car in dyno then it did

plzzz help....i nid proffessional advices here as the matter of fact it is very risky ur car turn off while driving in the midd of the road ppl!!!!!

Edited by comet
Link to comment
https://www.sau.com.au/forums/topic/115233-plz-help-urgent/
Share on other sites

Here's a translation:

Recently my car has been having some very weird problems. Whilst driving one day the car's engine suddenly turned off, and has been recurring since then.

I'm sure I didn't stall it as I had control of the clutch. It usually turns off whilst driving at around 20km/hour at low revs.

There's no problems with the car whenever I'm driving on the streets or on the freeway.

Is there a major problem to my car or perhaps some loose screw somewhere in the car need to be tightened?

Would a dyno tune affect this somehow, as the problem did not occur before I dynoed it.

Please help. I require professional (or may I say experienced) advice as there is great risk in the car turning off whilst driving in the middle of the road.

:)

Link to comment
https://www.sau.com.au/forums/topic/115233-plz-help-urgent/#findComment-2124824
Share on other sites

lol i also found this pathetic attempt at English from him....

satinic shut ur fcuking sacrastic dick up!!!!! iM not asking u!!!!

beside his listed was $700 ONO u no wat the fcuk ONO means? it mean i cn give him an near offer price

it fines if he cnt make it for $500 bt u cnt be that dickhead on ppl offer!!!! sad dick head!!!!

dnt tell me u hv a r34 too coz it's soo disgraced to hv suM smartass like u drive a nice car

so ravin? soo $500 or u cant do? if so wat is ur ONO on that bonnet? jst let me noe the ans okies thankz bro

http://www.skylinesaustralia.com/forums/in...0entry2124886

Link to comment
https://www.sau.com.au/forums/topic/115233-plz-help-urgent/#findComment-2124903
Share on other sites

Here's a translation:

Recently my car has been having some very weird problems. Whilst driving one day the car's engine suddenly turned off, and has been recurring since then.

I'm sure I didn't stall it as I had control of the clutch. It usually turns off whilst driving at around 20km/hour at low revs.

There's no problems with the car whenever I'm driving on the streets or on the freeway.

Is there a major problem to my car or perhaps some loose screw somewhere in the car need to be tightened?

Would a dyno tune affect this somehow, as the problem did not occur before I dynoed it.

Please help. I require professional (or may I say experienced) advice as there is great risk in the car turning off whilst driving in the middle of the road.

:yes:

:thumbsup::D

Link to comment
https://www.sau.com.au/forums/topic/115233-plz-help-urgent/#findComment-2132124
Share on other sites

I finx ta wayz yaz helpteded dat youngeded fell$ outtated and dat waz fulli sik. Cause e f*keded up iss talkinn an dat

hehehehhehehhehehheh

Translation,

I think the way you guys helped that young fella out and that was fully sick, because he f**ked up his talking and that.

Link to comment
https://www.sau.com.au/forums/topic/115233-plz-help-urgent/#findComment-2133054
Share on other sites

recently my car has tis prob!!! very weird!!!! i was driving suddenly then my car engine turned off!!!!!

im sure i didnt stalled it with mt clutch control oh anyfink!!!! and plus it usually turned off at around 20km/hr n around low ref

it doesnt turned off like on the normal speed or on the freeway!!!!

is that means major prob to my car or jst maybe some unscrew switch left behind needs to screw back?

is dyno tune might affected it in somehow? coz it has never happened b4 bt after i jst had my car in dyno then it did

plzzz help....i nid proffessional advices here as the matter of fact it is very risky ur car turn off while driving in the midd of the road ppl!!!!!

and i thought i was bad.....damnnnn. how olds this kid

Link to comment
https://www.sau.com.au/forums/topic/115233-plz-help-urgent/#findComment-2133693
Share on other sites

Which translation website did you run it through to get this?

Here's a translation:

Recently my car has been having some very weird problems. Whilst driving one day the car's engine suddenly turned off, and has been recurring since then.

I'm sure I didn't stall it as I had control of the clutch. It usually turns off whilst driving at around 20km/hour at low revs.

There's no problems with the car whenever I'm driving on the streets or on the freeway.

Is there a major problem to my car or perhaps some loose screw somewhere in the car need to be tightened?

Would a dyno tune affect this somehow, as the problem did not occur before I dynoed it.

Please help. I require professional (or may I say experienced) advice as there is great risk in the car turning off whilst driving in the middle of the road.

:P

Link to comment
https://www.sau.com.au/forums/topic/115233-plz-help-urgent/#findComment-2140223
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...