Jump to content
SAU Community

Recommended Posts

Hi guys i was hoping you can help me find the best value for money tint around for r32 skyline. Any suggestions for workshop and pricing will be very much appreciated. anyone done theres and have pics?

i am planning to get the darkest tint legal. the car color is black 2 door coupe in nsw. thanks for your help.

Edited by TutsR32
Link to comment
https://www.sau.com.au/forums/topic/115370-r32-window-tint/
Share on other sites

Go T20 - It looks awsome, especially on a black car!

And if your a mechanically able person you can remove your door trims and barter some money off. also barter money off for cash. But the big thing I would encorouge - Have you noticed you have two diagonal stripes up your window from your window guides like every other skyline I've ever seen? Then remove the guides an thuroughly clean them of all oilly, dirty residue and refit but also see if you can get the stained window glass polished to remove the streaks! Shouldn't cost much and you'll have the most individual skyline on the street if you accomplish this!

Link to comment
https://www.sau.com.au/forums/topic/115370-r32-window-tint/#findComment-2128158
Share on other sites

Just be careful with the darker than legal tints. Apart from being defectable, your insurance company can technically use this against you in the case of a claim. This is why I was careful when tinting my car. You can always call your insurance company to check if you do want to risk the darker tint, some may not care.

If you're not down with the group buy and you're in Western Sydney, I've got a guy in Blacktown who did a great job on my tints at a good price, just PM me and I'm happy to pass on his details.

Link to comment
https://www.sau.com.au/forums/topic/115370-r32-window-tint/#findComment-2130355
Share on other sites

The group buy organised through Greg at Unique Tint is still available for SAU forum members.

Check the link below for details - The price is still $150

http://www.skylinesaustralia.com/forums/in...showtopic=95122

Plenty of happy customers so far.

Link to comment
https://www.sau.com.au/forums/topic/115370-r32-window-tint/#findComment-2132977
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...