Jump to content
SAU Community

Toyota Aristo 2jzgte

_8OO5TED_
 Share

Recommended Posts

_8OO5TED_ Mentor

_8OO5TED_

Posted
Posted

Does anyone know who and where these can be complied in Australia? I have a friend who is keen to buy one as apparently they have just recently been added to the SEVS compliance list. Who has the plates for compliance and/or where could I find this information.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/115653-toyota-aristo-2jzgte/
Share on other sites
Medium Dave Proficient

Medium Dave

Posted
Posted

I was reading on prestige motorsport a company has recently taken delivery of one to do the r&d, but it will still be about 6 months before they will be ready to comply them (depending on how out of date I am, I checked the label on my tshirt but it does'nt say)

Big Rizza Mentor

Big Rizza

Posted
Posted (edited)

I looked into this a while back and Distinctive Car Imports & Auto Wholesale in Western Australia are both working on SEVS compliance as we speak (type? read?). DCI should have their demo in stock already. Im sure other states would have workshops working hard too.

Patience...

In the mean time you can wet your appetite with info from http://www.prestigemotorsport.com.au/

-----------

After a long wait, the Toyota Aristo (Lexus GS300) has been ruled as eligible for import under SEVS for May 1991 to August 1997 models (JZS147 and UZS143).

The Aristo is a luxury automatic transmission only 4-door sedan which was produced in RWD with the same famous 3.0 L straight 6 twin turbo and non turbo engines available in the Supra as well as the impressive 4.0 L V8 powerplant used in the Soarer (available in the 4WD model only):

Twin turbo JZS147 2JZ-GTE 3lt 206KW/1680kg IL6 Engine -122kw/tonne.

Non turbo JZS147 2JZ-GE 3lt 169kW/1580kg IL6 Engine - 107kw/tonne.

4WD UZS143 1UZ-FE4ltr 191 kW/1 740kg V8 Engine -109kw/tonne.

We are aware of at least one workshop with two Aristos already here for SEVS testing. But it may still be some time (possibly another 6 to 12 months) before the first workshop is approved to comply this model. Once this happens, we will then be able to source them to order directly from auction, for import to Australia. We will provide a further update to our Mailing List to let you know as soon as it can be done, so stay tuned.

The vehicles are great value in Japan and with about 200+ to choose from at auction each week they will start from as little as $13,000 complied. With the performance of a Supra in an unassuming 4-door sedan with leather and sunroof options, these will make excellent family cars and are destined to become extremely popular in Australia as they will be one of the best value for money imports available.

With plenty of power from factory they can also be easily and reliably upgraded just like the Supra, with a full range of bolt on upgrades available off the shelf.

If you are interested to see what is available at auction in Japan and the sale prices, please ask for a free 7-day trial of our auction search system for this model. Given the level of interest to recent free trial offers, we are limiting this to the first 100 people to respond.

Some basics on Aristos with a couple of quick links:

http://www.toyotaimportsforum.co.uk/aristo/index.htm

http://superstreetonline.com/featuredvehicles/130_0508_nob/

Article about modifying and drifting the later model (which is not eligible for import but the information is comparable to the JZS147)

Of course, plenty more information is available on the net.

Edited by Big Rizza
R32_Matt Rising Star

R32_Matt

Posted
Posted

I was wondering when theu were going to be added to SEVS complaince list.

I saw one in HPI or Zoom a couple of years back and thought they were a pretty luxo car. They said back then that they cant be complied and that this one was the only one in Aus as it was a personal import from someone who moved over from japan.

Guest

Guest

Posted
Posted

I have one sitting in front of me here in Vic Park, approval will be through very soon and they will proberly bring about a dozen in the first batch plus they will be well priced going on auction prices in Japan.

The Green trim is shocking so I am looking at Grey/Black trim only and car colour of White of Silver.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...