Jump to content
SAU Community

Recommended Posts

p.s. doluck style is pretty much just a flat boot without a lip, looks the shit on this dudes white s2

mines a white s2, so was thinking, yeeaaaar looks good

bit of a taxi boot but eh,

put a lip on my s2 front, that looks good

happy with the side skirts

just the rear end and the rim bling and im happy with her looks, got the interior sorted

then its just power mods

but im to busy decideing weather I want to "de-value" my car with decent power mods....

its gona be a bitch to sell in a couple of years the further from stock it gets

cuase as mentioned in another thread, a 2 door isnt going to do me forever, im not rich enough to keep more than one car for the next few years id say.

what do you guys reckon? harder to sell once moded ?

p.s. if we can ditch the advertisements and propaganda for a thread ?

hey i know im being lazy :laugh: i cant find any flat boot spoilers anywhere i know there is on our sponsors website but that one isnt painted and i would rather a painted one, does anyone know where to find one and aprox cost ?

hey i know im being lazy :laugh: i cant find any flat boot spoilers anywhere i know there is on our sponsors website but that one isnt painted and i would rather a painted one, does anyone know where to find one and aprox cost ?

heres a few of my wing... its called the 'stealth' wing or sometimes 'drift' wing

post-11124-1147832178.jpg

go for stealth wing. I think the s2 is a step backwards over the s1 wing. personally I thinka 2 year old could have designed a better wing than the one they disigned for the series 2.

I agree i dont like the boxy look, i love the stealth wings :D Has anyone got anymore pics of stealth wings ? i love looking at them ;) ps im still looking for somewhere to buy one besides justjap cause that one isnt painted :

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...