Jump to content
SAU Community

Recommended Posts

hey guys im gna go and buy a 2nd hand hks tripple plate clutch + lightend flywheel from this guy this week. but ive got no clutch knowledge. how can u tell how much meat the clutch has and if its on its way out?... any pics would be great! im sure other ppl wana kno this too :thanks:

be slow on technical terms too please :laugh: thanks!

Link to comment
https://www.sau.com.au/forums/topic/117454-how-do-u-inspect-a-clutch/
Share on other sites

you need to measure the thickness of the plates and compare how thick they are now, to how thick they are brand new (need to find this out). you will need a set of verniers to do it.

I bought a second hand twin plate oz giken clutch and the mechanic i went to just compared it to another one he had there with half decent plates on it. If there is another decent plate you can compare it to with some vernier calipers go for it, otherwise just make sure it's not paper thin.

If i remember correctly, put the thiner plates furthest away from the flywheel to make it last as long as possible.

edit: beaten dam it!!

Edited by jantolis

oh, and personally i wouldnt bother with the second hand clutch unless it is very cheap. the biggest cost is putting the thing in (unless you can do it yourself) so either way you dont want to be pulling it out again soon.

i bought mine as advertised 95% new, and it had 95% meat left on it. The guys sent it off to be checked, and the metal plates were bent 40 thou, and it required a new bearing carrier.

I was lucky as it cost $450 to recon, and the guy i bought it off refunded the cost to get it fixed.

if you want to be sure, take it to a good clutch place to look at and confirm its condition before purchase :woot:

700 is cheap. it's not a big deal to replace plates, pressure plate etc. e.g. go to otomoto - you'll have to google the addrress.

full rebuild including everythning for an OSG twin is about 1.2k. those things cost about 3k new. so even if the whole thing is totally shagged, you're getting a brand new one for 2k. not bad.

chances are its not totally dead like a door knob and you'll still get good use out of it.

even if the plates have 50% left, it'll last a while. those things are pretty strong unless you're burnout boy and drop the clutch everyday.

dont! i nearly did and drove one with one fitted and didnt like it at all and cost of rebuilding them. i ended up getting a exxedy single plate and lightened stainless flywheel for $1500 and it is awesome!!! never slipped even at 7500rpm launches with over 600rwhp! just lights up all 4 is 1st 2nd and 3rd, never tried 4th or 5th. and is only a few hundred 2 rebuild. if ur gonna drift get a twin or tripple, but u have a gtr.

interesting. yeah ive looked at the jim berry clutches, however i cant have my car in a workshop while the clutch gets rebuilt. as its my daily driver.. do u guy recommend buying a 2nd hand clutch then doin the JB clutch?. and can anyone recommend a cheap place to install in sydney? thanks guys! i think im gna stir away from the hks clutch :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...