Jump to content
SAU Community

Recommended Posts

baboo - "RB26 composite exhaust gaskets - brand new $50"

which ones?

- the 5-bolt rear gaskets or manifold to turbo gasket?

- all for $50?

- who are they made by?

thank you :D

  • 2 weeks later...
  • 2 months later...

Are the Turbos still for sale ? Brad

Due to some upgrades, I have some surplus BNR34 parts for sale. all item is off an 2000 BNR34 vspec with 30000km.

1. 2 X BNR34 vspec stock turbos - running take offs, had stock boost all their life, excellent condition. $900 for a pair or 500 each ono.

2. BNR34 stock intercooler - excellent condition, support upto 600hp $500.

3. BNR34 stock intake plenum - excellent condition, $SOLD

4. BNR34 stock Vspec suspension - 30000km, excellent, fit R33/R34 gtr $500.

5. BNR34 stock rear lights - excellent condition, $300 for a pair

6. Stock RB26 fuel rail - excellent, $60

OEM RB25/RB26 timing belt - brand new, $75

Few gaskets for sale

HKS metal exhaust manifold gasket RB26 - brand new $SOLD

Permaseal RB26 composite head gasket - brand new $100

Permaseal RB26 composite exhaust manifold gaskets - brand new $50 a pair

also have various OEM nissan / Permaseal intake gaskets for sale.

Please PM me or email to [email protected] if interested.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...