Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Yes, it fits the series 2.

Payment Instruction

Postage & Handling = Free freight Australia wide, required $40 freight insurance for possible loss or damage in transit

PAYMENT TO FLYING PERFORMANCE INTERNATIONAL PTY LTD

ST. GEORGE BANK LIMITED

BRANCH NO. 112-879

ACCOUNT NO. 065766824

PLEASE you must give the bank your forum user name as the description of the transaction. That way it shows up on our bank statement with the amount you have sent us. So we can match your order with your payment otherwise there may be a delay for us to match the payment to your order!

After you have made the payment, please you must e-mail us with your payment date & amount, your name & postal details.

Once we receive your payment, we will inform you and send it at the same time.

It will be packed and sent securely in boxes or bubble padded bags for best protection.

Hi sorry one more question

what is the different between the one you are selling here and this one:

but this one you are selling for $650.

another question.

to install the kit is cutting of the car required?

Flying Performance International is the only official online Hybrid dealer

Flying Performance International official website www.flyn.com.au

Check out the Hybrid official website at www.powerdigger.com

Now, Flying Performance brings you the best ever deal you can find in this financial year, we are offering the 100% genuine Hybrid GT Spec intercooler kits for $650 delivered.

For this group buy, full payments need to be received before 26-05-06 and delivery will be made 01-06-06.

Check out all the photos of each kit at www.powerdigger.com.

Hybrid intercooler kit $650 delivered

New s13 / 180sx sr20det

New s13 / 180sx ca18det

s14 / s14a

s15

skyline r32 rb20det

skyline r32 rb25det

skyline r33 rb25det

skyline r34 rb25det

GC8 WRX

Supra Twin Turbo

Soarer Twin Turbo

Pulsar N14 GTiR

evo 4-6.5

evo 7 & 8

*All kit contains one latest Hybrid GT SPEC Tube & Fin Intercooler, all necessary brackets, screws & nuts, silicon hoses, aluminium piping and stainless steel racing clamps

*All piping kit comes with a step-by-step pictorial instruction for easy DIY installation

* 1 year manufacturer warranty

They virtually the same, the only difference is the colour.

$650 is with the polished piping, where as the cheaper one has the red colour piping.

everything else is the same.

Got mine today thanks mate, that was fast delivery ;)

looks great

Cheers

Bizzy

Very good to hear you received the parcel, thanks for your purchase.

can you post some pics after you install the kit please?

thanks

Flying.

air%20filter%20ad.JPG

Latest SABER Stainless Steel Mesh Air Filter $35 each

Engine power is directly related to the airflow both coming in (Intake) and passing out (Exhaust) of the engine, factory intake systems are highly restrictive, so limiting engine power and torque. Saber Air Filter produces smoother and more even airflow with increased velocity for optimal air / fuel mixture. Installing our Saber Air Filter is one of the easiest and most inexpensive ways to increase engine response and better fuel efficiency.

* For both Turbo and NA cars

* Strong structure with 304 stainless steel mesh filter used

* 3" inlet with stainless steel racing clamp included

* Proven power gain for maximum performance

* It produces much louder intake sound and instant power gain

* Easy to maintain, fully washable & re-usable

* 2 sizes available : 16cm base width x 11.5cm height

12cm base width x 13.5cm height

can we organise pick up??? how much would it cost for pick up???

sorry, we dont do pick up anymore as we changed office location.

we just send it out after received payment.

  • 2 weeks later...

Flying Performance International is the only official online Hybrid & SABER dealer

Flying Performance International official website www.flyn.com.au

Check out the Hybrid & SABER official website at www.powerdigger.com

LOGO10.JPGflying%20banner2.JPG

logo%20top%207.JPG

sabergauges.JPGsabergauges%20on%20off.JPG

SABER 60mm ELECTRONIC GAUGES

SMOKEY LENS SERIES now for sale! $180 each gauge

SABER 60mm gauges are electronic blacked out gauges which have high responsiveness and refined designs. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up in bright white with full effect.

Boost%20blacka.JPGOil%20press%20blacka.JPG

Oil%20temp%20blacka.JPGWater%20tamp%20blacka.JPG

AF%20blacka.JPG

* SABER electronic gauges provide more accurate reading over the mechanical type gauges, giving you a peace of mind over the reliability of your rides.

SABER full-line up: boost pressure in PSI (for turbocharged and supercharged engines), oil temperature, oil pressure, water temperature, and air / fuel ratio, all with SABER black face and white dials.

* SABER gauge dials are invisible when the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting instrument needle pointer are used in the gauges to increase visibility at night and in low-light conditions. They also features built-in light dimmer function.

* SABER gauge pointers are driven by stepping motor with a microprocessor, needle accuracy up to 0.1 degrees of movement. It provides a smooth instantaneous response for rapid acceleration of high performance vehicles.

* The included removable gauge visor is for eliminating the virtual image of gauges reflected on the windscreen.

* All SABER gauges are applicable only for 12V vehicles.

* Each Kit also comes with gauge mounting kit, gauge visor, all wiring and a step-by-step instructions.

hey mate

do these kits bolt str8 into place on the R34 GTT

or do you have to modify anything?

let me know

One major thing you need to do is to cut one hole for the piping to go through.




  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...