Jump to content
SAU Community

Recommended Posts

i tell u now it does NOT run like a crap box

I have a Mines ECU in my 32 GTR as well and it runs very nicely. its not running over rich and it has a hell of a lot of power for a standard GTR. It holds its own next to my mates GTR with pfc, cams, turbo back exhaust, and running 1bar boost!

if u use a mines ecu ur car will run like a crapbox :)

There is nothing about the mines ecu that means a car will run poorly (or well) just like a PowerFC or any aftermarket reprogrammable ecu; its all down to the tune.

If there is a problem with the mines ecu, its that there are very few tuners outside of Japan (and particularly Mines) that have a way to reprogram it, so you tend to be stuck with whatever tune was last performed in Japan. Given the fuel differences, that can be a problem.

gazza750: The safest (and cheapest) thing to do for the time being is to whack it on a dyno and check the air/fuel ratios. Once you have those you will have a much better idea of the suitability of the tune and whether its necessary to change the ECU straight away (i.e. if you discover its running lean and might damage the engine) or can put it off for awhile.

There is nothing about the mines ecu that means a car will run poorly (or well) just like a PowerFC or any aftermarket reprogrammable ecu; its all down to the tune.

If there is a problem with the mines ecu, its that there are very few tuners outside of Japan (and particularly Mines) that have a way to reprogram it, so you tend to be stuck with whatever tune was last performed in Japan. Given the fuel differences, that can be a problem.

gazza750: The safest (and cheapest) thing to do for the time being is to whack it on a dyno and check the air/fuel ratios. Once you have those you will have a much better idea of the suitability of the tune and whether its necessary to change the ECU straight away (i.e. if you discover its running lean and might damage the engine) or can put it off for awhile.

I also have a Mines ECU for my R32 GTR. Does anyone want to swap a standard R32 ECU for my Mines retuned ECU??

It's currently running very well on the car and also has the 180km speed limiter removed, which is great for track work and drag racing. But they cant be re-mapped due to the epoxy glue over the chip.

Im willing to do a straight swap!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...