Jump to content
SAU Community

R34 Coil Packs - What Are The Test Values? Help!

Zensoku

By Zensoku,
in General Maintenance

 Share

Recommended Posts

Zensoku Collaborator

Zensoku

Posted
Posted

My RB25 has started dropping down onto 5 cylinders very randomly, which I initially thought was a misfire with the spark plugs. Used to happen under load 3500-5000rpm which prompted me to change the plugs...

Plugs didn't help, and now it seems more regular now and drives like a "lumpy V8" most of the time now instead of the few seconds it used to drop a cylinder....

During the painstaking process of changing the plugs, I quickly put the multimeter onto each coil and got:

Cylinder 1: 852 Ω

Cylinder 2: 903 Ω

Cylinder 3: 687 Ω

Cylinder 4: 809 Ω

Cylinder 5: 859 Ω

Cylinder 6: 851 Ω

Now, these figures seem very high compared to the series 1 RB25's, (0.7Ω is the norm?) but I believe my coil packs have the igniter built into them. (unlike the early RB25's which have the igniter inline before the coils)

I have a Japanese Engine manual, but couldn't find anywhere how to properly test these coils and what the normal values are.... Can anyone help? Cylinder 3 looks like the culprit....

Oh, and the ECU self-diagnosis mode shows up error number 21: Ignition Circuit - "No consecutive ignition signal while the engine is running"

  • 4 weeks later...
Kirill Rookie

Kirill

Posted
Posted (edited)

I got the same "Error 21" yesterday. the engine sounds as usual and but for the "Check engine" light I wouldn't have noticed any difference.

I'm going to run power balance check one of these days - hope it will help to find out whether the prob is in one of coils and in which one.

BTW, how to get to the coils and spark plugs on R34? I'm affraid that I won't fix the problem without getting to them, but I absolutely have no clue on how to remove part of intake manifold (and what exact part shall I remove to get there).

Edited by Kirill
Luke 34GTT Explorer

Luke 34GTT

Posted
Posted (edited)

I have exactly the same problem and its driving me crazy! The engine check light comes on and it starts missing on one cylinder etc, and its is always a code 21 when i check it. The annoying part is that it is so random and it doesnt "stay" missing long enough for me to be able to check out what coil pack is playing up etc. Sometimes it will go for 3 weeks with out missing a beat, then other time it will do it 2 or 3 times in one day. Do you guys know, if there is anything else other than the coil packs, that will cause the engine check light to come on (code 21)?

Edited by Luke 34GTT
  • 2 weeks later...
Abo Bob Grand Master

Abo Bob

Posted
Posted

Look I've got no idea about the values you posted above but I can tell you that my coil packs died at a genuine 66,000 k's and having been around here for a few years now I can tell you that the R34 coil packs are quite likely to die between about 50,000 and 100,000 k's.

All you guys have the same issue.

Also I would not recommend getting second hand ones even though they may work fine now because eventually...

Splitfires are the way to go I'm sorry to say.

  • 1 year later...
PLYNX Mentor

PLYNX

Posted
Posted

Tried to find the same basic issue with my car and wasnt sure if it was the coil packs and didnt want to lay out 500 odd bucks unnessesarily. So I pulled then out cleaned then and coated them with polyester resin. It turned out to be the problem even if I couldnt see the cracks. Fixed It a treat

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • MBS206
      Jacks that fit under GTR lips that can reach the subframe?

      By MBS206 · Posted

      For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • MBS206
      NC MX5

      By MBS206 · Posted

      Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Sorry I meant that we are building the EH for a client.
    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...