Jump to content
SAU Community

Recommended Posts

KYOSHO have released their new "Gorgeous Collection" 1:18 scale (about 25cm) DieCast (metal)range.

I got myself an R32 GTR & a Datsun 240k 2 door GTR today. The detail is absolutley awesome!!

Excellent paint finish (grey or white for the 32 & red or white for the 240k) the doors bonnet & boot open to show FULL detail...

-complete engine with everything the right colour, a/c, front mount, all rubber hoses, warning stickers, bonnet mat, even writing on the fuse panel cover & hose clamps on the radiator hoses

-suspension, rubber tyres, drilled discs 'nissan' written on calipers, steering wheel turns when the wheels turn

brake lines, exhaust, hicas etc

-fabric on the seats & doortrims (padded vinyl in 240k), carpet, soft fabric seatbelts with metal buckles, all the guages have needles/numbers, stereo, interior light, even the boot mat comes out to show space saver spare!

So if you're into models these are absolutley excellent,

got them from Sheriff's Mini Cars on Church St Parramatta (Sydney) they have a 20% off sale on today & tomorrow 21st &22nd May

for only $88.00 or $110.00 each after the sale

Link to comment
https://www.sau.com.au/forums/topic/118824-kyosho-diecast-model/
Share on other sites

Has anyone bought a Kyosho model before? Whats their quality like?

I have an Autoart R34 GTR and have found an Autoart R32 and was just wondering if one was any better than the other.

The Autoart R32 is currently out of stock so if Kyosho is a good brand i will just get it.

Cheers

AutoArt is about the best of the mass-produced models that I have come across.

I didn't know that AutoArt did an R32, I might have a look at getting one. I have a bunch of model cars of all different brands - Hot Wheels Die Cast, autoart, bburago, maisto etc.

Does anyone know of an R33 GTR die cast model? I don't care what it costs, I want one.

  • 3 weeks later...

Kyosho and Autoart are both top quality Diecast car Manufacturers.

One is not better than the other.....

It really depends on the specific model they do, for Example the new Kyosho R32 GTR sh*ts on the Autoart equivilent, yet on another car the Autoart one may be a better replica.

Minichamps also make some quality 1/18 models

Heres a few of mine:

Autoart Porsche GT3R and Minichamps Sierra

mod13.jpg

Revell Opel Manta, Autoart Audi Quattro and Autoart Torana SLR5000

mod14.jpg

Autoart R32 GTR

mod2.jpg

Kyosho 240z, Revell 350z and Kyosho 2000 GT-R

mod3.jpg

Autoart R34 GTR

Mod1.jpg

BTW, I have found at $129 IKEA make the best Value for money Display Cabinets, they are about 6ft tall, all glass, and have 4 display levels (3 x 1/18 cars per), they also come with a light :)

i do, i forget wat size it is, its bout 10cm long. my ex got it for me off ebay. bleck r33 gtr

I have seen the ones on EBay, they are too small, from memory, 1:43 scale. Like the grey one a couple of posts above.

I want one in 1:18 (preferably), or even 1:24 scale.

Got me a red Kyosho R32 GTR as well for $99, same colour as my car.

Love the detail. I actually pulled out the space saver spare and it's just like the real one.

It lives with my 1:18 1991 bathurst winner GTR.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...