Jump to content
SAU Community

Recommended Posts

Guest one8tee

Hello everyone, I've finally acquired an R33 GTS-t Series 2(saving up for that GT-R):D

Been surfing the forum for awhile now, but I can't seem to find much info on this "A-LSD" thingy. It's in the speedo, next to the word "Slip". I heard from some people that it's some form of traction control for the R33.

Anybody out there encountered this before? Any feedback on it's good/bad points? Can it be turned off??

Thanks.

PS:Also I've noticed there's not alot of bodykit options for the Series II(from what I've seen), especially for the front-bar. So would any series 2 owner out there care to shed some ideas?

cheers all.

and LSD is a LIMITED SLIP DIFF

it makes it so both wheels spin. therfore putting more power to the ground.

its not electrong and its not traction control(ignition cut), authough it does control wheelspin.

all r33 gtst's have lsd's

most commodores have open center diffs which means only one wheel will spin.

main reason ppl think their commodores are tough. (wheel spinning)

the lsd enables u to put power more evenly to both wheels authough it is not 50:50 power.

if u wanted 50:50 u woudl have to look into a weld job or mini spool or full spool or detroit locker.

i have both active lsd and slip... i am pretty sure they both come together and are very very rare on all r33's apart from gtrs. the slip indicator light comes on when the rear wheels lose the slightest bit of traction, even before you can feel it. It is not traction control, traction control backs off the throttle to help regain traction this simple lets you know that u either are losing traction or have no traction.

Motox was pretty good with his explination however i think he missed a point where the active lsd enables one wheel(i think thi is correct) to spin faster then the other one thus puting more power to one side of the car this is extreemly helpful when the back goes out. You dont even have to really fight with the steering the car just pulls itself in rather easily.

And also if you want to see how special you are have a look inside your boot on the right hand side, you'll have a little resivour(spelling???) for the alsd which other r33s wont have :D and also have a look under the back of your car then have a look under someone elses car who doesnt have these features their car will look bare compared to yours. :D

i already know the a stands for active lsd do a search on this, ive started a threrad about this before... it is extremely rare ive heard it was a feature which cost an extra 15k but im not sure how true that is.... anyway you are very lucky to have these features as am i! :P

My R33's door lock when i shift my gear to 2nd, is that a safety shit or some thing wrong with my car?[/quote

do a search on this topic!!!!!, what does that have to do with this subject, and also it doesnt do it when u shift into second it does at when u hit 25km/h it is for safety obviously!

if your unsure start a new thread but dont whore others

A-LSD: As already explained, stands for Active Limited Slip Differential. It's the same system as used on the GT-R.

In a nut shell it uses a computer controlled rear limited slip diff that transfers a percentage of power from left rear to right rear or visa versa as required, thus maintaining best possible traction.

A-LSD wasn't so much an extra 15k cost option but rather a different spec of car on top of the GTS25t (this is for S2, S1 not sure?). When I get a chance I'll look up my R33 S2 price guide. I've got the new car prices (in Yen) from bottom of the range through to N1. The A-LSD GTS25t is listed above the GTS25t & IS dearer. I'm pretty sure it's not 15k dearer though!?

As akeenan posted above, the passenger door lock function is a standard safety feature. When the car exceeds 25km/h it locks.

I HAVE ONE OF THESE!

Don't break the diff.. It's extremely hard to get a replacement and extremely expensive to fix. Seeming they are soo rare no one really knows alot about them. I have been informed they are basically a GTR diff with different ratios. SOO... I have just opted to get the diff in my car fixed.

I see the slip light come on fairly often :angel: ... But never really seen the A-LSD light... Is this good or bad? :confused:

It looks pretty tough but when someone is in the car for the first time and the wheels spin and the light comes in. Straight away their question is "What... thats soo rhad?!@" ... I just shrug cause I'm used to it now :)

Oh yeah.. BTW my car is a series one with quite a few series two bits.

Originally posted by GTS-t VSPEC

The A-LSD light should only come on if there is a problem with it.

My series 1 has it, it's a cool feature, makes you braver when cornering fast, as you are sure the back-end will correct itself.

See'ya:burnout:

it also comes on when you get it majorly sideways. :(

mates 33 in perth also has it.. i read somewhere there were only 100 released, it seems there's a few people on here with them though.

Shaun

OK this is from the original 96-97 Nissan pricing info:

Coupe:

*NOTE* - Type M means turbo (it isn't an up spec version of the GTS25t!)

GTS25t Type M 5sp - 2,916,000y

GTS25t Type M Auto - 3,013,000y

GTS25t A-LSD (5sp only) - 3,196,000y

Interestingly enough the GTS25 Type S Auto (RB25DE) was more expensive than the Type M 5sp (RB25DET) @ 2,928,000y !

97 GT-R N1 - 6,096,000y

4 Doors:

GTS25t Type M 5sp - 3,225,000y

GTS25t Type M Auto - 3,322,000y

GTS25 Type S Auto - 2,850,000y

The GTS25t A-LSD Type M (that's how it's listed!) is heavy than the GTS25t 5sp or auto (1370kg - 5sp 1390kg - auto 1400kg -A-LSD 5sp) It also came standard with 205/55/16 F 225/50/16 R.

S1's (93-94) & S1.5's (95 models) with the A-LSD I have no info?

My 9/94 model doesn't have the A-LSD but it does have ABS :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • it was good to see our presence at GTR festival..hope to see more SAU at these events 
    • This is awesome.     
    • Thanks for the quick replies guys its appreciated. A small extension was welded onto the standard 6boost external gate pipe which you can see where the pipe goes from black to stainless just below and to the right of the rear housing in the first picture. Overall I would say the flow is pretty good other than 6boosts choice to come straight off the collector at a decent angle.. Not sure why I went with two valves, I originally replaced the stock twin bovs with the GFB when I had the twins on. When I purchased the EFR it came with the Turbosmart Kompact BOV so I figured that would be a better option than the stock EFR Bov. I don't believe the Turbosmart BOV is adjustable? When I get the spike and then sudden dip in boost pressure, the turbo speed does drop as well. Stock head size wise however I believe it has Neo Turbo springs and a Neo Turbo intake camshaft and an aftermarket exhaust camshaft in the vicinity of 260 degrees. We didn't try a different MAC valve, we tried two different ways of plumbing it and we also tried removing the mac valve entirely and just having the boost source from the turbo directly connected to the wastegate and it still spiked / dropped and exhibited the same behaviour. Standard R33 GTR 5 speed tansmission. I'm running a Haltech Elite 2500 and can provide some logs if you. I understand what you're saying in that it looks like an auto plot however no, it's still a manual and it just has a lot of torque down low, for all intents and purposes it's a very impressive street car. I've attached a photo of the quickbitz dyno plot which was when the only difference is I was running -5 twin turbos with a mac valve. As you can see theres a decent dip in AFRs between 125kmh and 135kmh. Our problem now is not that the AFRs are dropping, just the boost pressure is dropping, however it is evident in the same RPM range of the map, coincidentally or not.
    • What transmission are you running?  It's a bit tricky with the scaling, but at face value the power "curve" looks more like a "line" which is a bit odd... basically a lot more like a dyno plot I'd expect with a highish (compared to a factory auto) stall torque converter type setup. If this is running an auto then this kind of boost control challenge is definitely a thing, the rpm scale on the dyno doesn't reflect what the engine is actually doing (unless the dyno has access to the engine's ACTUAL speed electronically) and what you'll get is a big rpm flare up as the engine torque launches past the converter pump's ability to resist torque at that rpm, then as the converter starts picking up rpm it will kinda even out again and the engine rpm will pick up more steadily. The trick with this "flare up" is if it's kinda near the boost threshold for the turbo then the engine's airflow requirements to maintain the previous boost level will outrun the turbo's ability to supply that boost - so you end up with a natural flattening off, if not dip when that happens.   If you are running closed loop, or even tune the "feed forward" wastegate duty cycle to deal with that rpm spike then when the engine starts settling to a more typical climb you'll actually have a situation where the gate is "too closed" and boost will run away for a bit, then have to pull down again.      It's not trivial to get this perfect as most boost control systems are generally expecting more predictable engine rpm rates of change, but if you *know* that's whats going on then you can at least "accept your fate" and realise getting that area perfect is kinda chasing your tail a bit, and assume that if the rest is working sensibly and the spike/dip isn't completely uncontrolled then you should be good. Sorry if I've gone off on a tangent, but the dyno plot and boost control behaviour look a LOT like what I've seen tuning autos in the past. What ECU are you running? Could possibly be convinced into looking at logs if I get too bored this weekend haha.
    • A few things that seem a bit off here. - why is there 2 BOV’s?  - the turbo smart BOV on the compressor housing, is it turned up ALL the way? I have seen this become an issue on old man Pete’s car. It would push open and recirc, turbo speed would rise and the boost pressure would do weird things. - stock head? Does that include springs? - tried a different MAC valve? Is it plumbed correctly?
×
×
  • Create New...