Jump to content
SAU Community

Recommended Posts

i have the following mods:

fmic, turbosmart dual stage boost controller, apexi s-afc 2, k and n pod filter.

before i got the safc2 installed i tried boosting it too 12-13 psi and i was getting this hiccup in the engine when i put my foot to the floor, and i thought it would have to be the a/f ratios, so i decided to get the safc 2 as the power fc was way out of my budget, for $900 i got the safc 2, had it installed and dynoed.

as it was being dynoed on high boost of just under 13 psi it was doing that hiccup thing again, and eventually the guy must have tuned them out cos it wasnt doing it anymore. so i was happy. took the car home and for a few days it was fine, but then it started doing the hiccup thing again, not as often as before but still there and very embarassing when wanting to drag sumone, the whole car would shudder for a second or 2, and keep going, it would literally jerk.

does anyone have any idea what this could be and how to fix it???

sumone said that the boost level was too high and was blowing out the spark in the plugs, so i bought new ones, ngk platinums and regapped them to 0.8 mm, but no improvement, the only way to avoid it is by using a maximum of 75% throttle.

any help would be appreciated...:D

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/
Share on other sites

thanx for the replies.

the safc 2 takes care of the boost cut, could be fuel pump,

i did turn my boost down a bit, but no help, if i turn it down anymore there wont be any point boosting it

i think the best bet is to get it redynoed but i thought there might be a simpler solution

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/#findComment-211025
Share on other sites

if this hiccup is around 5000rpm, then it is most likely the same spark problem that all the R33 owners get after boosting their cars.

Have a search in here for "misfire" or "5000rpm" and you'll see other peoples replies.

I think they were saying to gat the plugs to 0.7 (I think)

good luck.

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/#findComment-211380
Share on other sites

Change your fuel filter, you should do this regularly anyhow.

The fuel pump issue, will play out like this;

* try getting up to 5000rpm in 1st using light throttle, then at 5000rpm cruise put your foot flat to the floor. If the same issue occurs straight away it's probably not your fuel pump. If it allows you to gun it through first and then starts doing its thing in 2nd or 3rd then the fuel pump might be at fault.

The spark plugs maybe too hot for the load. Try a range or two colder. Buy cheap copper ones.

Check your base timing.

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/#findComment-212547
Share on other sites

ive just changed the fuel filter so its not that, it was doing it before and after the change.

i dont think it happens in 1st at all, but in 2nd and 3rd it does only when i put my foot to the floor on high boost.

i think the heat range for my plugs are a 6, could b 7, cant remember

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/#findComment-212559
Share on other sites

My car is doing the exact same thing, I got new spark plugs put in today gapped .8mm. Its been on the dyno yesturday and today and turning the boost down from 1bar isn't helping. I have a standard ECU which will be replaced by a powerFC as soon as I get around to ordering one.

Yesturday I only managed 175.1hp on the dyno.

Tommorow I might have another go.

Mark

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/#findComment-212906
Share on other sites

If it happens when you hit 2nd or 3rd from a standing start test and doesn't act up at all through 1st gear then the fuel pump is perhaps at fault.

When I say standing start or rolling start run at 5000rpm I mean going from 1st through all the gears to 4th as if racing. You might only get to 2nd when it occurs. If it occurs in the later gears and not the 1st fueling is the issue.

It could be ecu 'fuel cut' also.

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/#findComment-214337
Share on other sites

i was told the safc 2 removed fuel cut?

becos i had a fuel cut defender in there before i got the safc 2 and when i got the safc 2 installed he said i dont need the fuel cut defender anymor

i'll take the car for a thrash and see if it does it in 1st or not...

i was actually driving it pretty hard yesterday on high boost and it didnt do it once, seems to do it when ever it feels like it

Link to comment
https://www.sau.com.au/forums/topic/11897-boost-problem/#findComment-214401
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...