Jump to content
SAU Community

Recommended Posts

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

PPCC, Japspec, SAU, Coastals, CCWA, Rollaboyz, Big Al's, Ace Ford.........Been on em all :)

Rarely beaten.....Old green Bluebird ran 12.8 @110mph........current ride should match it :D

I'd say only 10% of cars on a local cruize would run quicker than a 13 flat.....good odds :D

hmm.. old days of coastals we had some fun cars :)

plus theres a few other cruises that occur with quick cars. as for Rollaboyz please.. nething which can do a 14 would be quicker than 99% of those :D

Eitherway the hunt is on for my R31. I plan to ad another quick 1 to the streets of perth :D

Sweet.. RB20 or RB30? For about $3000, you can get a R31 GX with some rims.. and for about $5000, and if you do some mods yourself.. a turbo.. and then you will get about 300rwhp, which will put you into high 12's.. :D But you have to get a lower compression block.. or an easier trick.. get a copper head gasket! :D Just a larger one, not prone to damage like the normal gaskets, but make the head fk up easier.. well worth it :) dont drop the compression to turbo specs though, just enough so you can run about 12-14psi :D *drools*

Some of you guys should check out this thread...as some dont seem to believe RB20DETs are capable of 12's!......Even though I have stated knowing of 2 with reletively minimal mods (Simon / Sean) which are!!!

http://www.r31skylineclub.com/forum/index....d=3381;start=30

Oh well :P

there are alot of narrow minded fools around who think along a simple mindset and arent open to other views. Remember someone will always know more about it than u.. regardless of their experiance.. Hence i plan to go my own way along the line with the 31 and see how i manage hehe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...