Jump to content
SAU Community

Recommended Posts

me and my bro always let our cars warm up for 1 min, if temp needle is right at cold, then drive of slowly, shifting no higher then 3000rpm.. until temp needle is at normal indication. Keeping a auto skyline off boost is quite tricky, because at cold start, its running retarded timing too, so even the slightlest hill means it wants to at least get to 0 vaccuum. :D

oh we both atm use pennzoil 15w 50w semi syn

Edited by J_R32

By the time I get 2km down the road, the engine better be warm if it knows what's good for it because it is going to get the fork reved out of it and the full 15PSI boost up the motorway onramp... every morning.

But that's ok, because "Diamonds are Forever"

Edited by PTR33

Yeah normally takes a min - open garage, start car, back car out, close garage, then driven under 3k RPM until its up to temp before it gets positive boost.

It's silly, a waste of petrol, and can even be worse for your car, if you let it sitting there idling for 5+min etc.

Depends on the car... my current pride and joy (v8 commodore - until I get enuf ca$h together for the R33) gets started, left until the revs settle in (usually about as long as it takes to kick on the CD, get my sunnies, light a smoke and roll down the window). Then gets taken easy until the needle moves towards the H and settles between 1/4 and 1/2.

I don't see the point in idling for a long while - seen what it does to diesel generators (glazed bores = bad ), imagine it wouldn't be any better for a petrol one.

The beater (read for the train station) gets kicked over, dropped into gear and gone str8 away - but for $300... who cares anyway :D, come to think of it.. not even sure if the engine in that even needs oil :)

Yeah normally takes a min - open garage, start car, back car out, close garage, then driven under 3k RPM until its up to temp before it gets positive boost.

It's silly, a waste of petrol, and can even be worse for your car, if you let it sitting there idling for 5+min etc.

my dad always cracks it at me if I do this... he reckons if I start the car before I open the garage, and trip over something in the garage and pass out.. then I will do so in an unventilated room with a car pumping out co2 emmisions.. or CO if you don't have a cat..

My oil pressure gauge in my 32gtst works occaisionly, and does all sorts of strange things, as many 32 gtst drivers will know, I turn it on let the revs drop to 1100rpm.. then drive.. I try to stay off boost, but there's a lot of hills around my place, so sometimes this is difficult. Use motul 4100turbolite

geez.. we're all a little precious :)

30 seconds at most, drive off.. boot it if so desired.

It's usually only about a minute before you have to stop again when you come to the first set of traffic lights or whatever anyhow when you're sitting there idling again.

geez.. we're all a little precious :starwars:

30 seconds at most, drive off.. boot it if so desired.

It's usually only about a minute before you have to stop again when you come to the first set of traffic lights or whatever anyhow when you're sitting there idling again.

Expecially when one spends ~6k on a motor/head. ;)

I so wish sometimes I did what sky30 did.. s/h rb30e for a hundred or two, drop a s/h rb25 head on, big turbo and boost the crap out of it. :w00t:

I usually let the car sit for about 1 minute then drive off try keep it below 3000rpm till the Power FC hand controller says the waters about 60 deg then ill take it up to 4 grand till its at its normal operating temp (around 72 deg) then boost till my hearts content.

i don't bother letting it idle that much...get in start it pic a song on the ipod empty my pockets and back out the drive way... then jsut drive off and keep the revs low and off boost... u end up at stop signs and lights so quickly it makes no difference...

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...