Jump to content
SAU Community

Recommended Posts

haha certainly do. the engine tends to hydraulic lock up, and bend stuff inside.

but seriously, u can try covering the vents up, but water WILL find its way in there, but what you could do, is fab up a 'guide' from the vents to the front/side of the engine away from any eletronics. i didnt bother doing this, and i had no problems...until that fateful day where i washed my car when i had my cooler pipes disconnected :dry:

^^ he knows from experience.

Είναι Παρασκευή, δόξα τω Θεώ, πώς είναι το καθένα σήμερα; Είμαι εξαιρετικά βαριεστημένος, έτσι θα σκεφτόμουν ότι θα ερχόμουν και θα έλεγα γειάσου!

Is that Friday, in the God which appreciates, how everyone who is today? I super will be boring, therefore I came today, I thought of that you say!

I take it the Greek is something similar...I can only read bits of it...half greek :)

Yeah close enough, you should see what babelfish translates in back to english as:

It is Friday, glory tw Cew', how he is each one today? I am exceptionally varjestime'nos, thus I would think that I would come and say geja'soy!

Es ist Freitag, dankt Gott, wie ist jeder heute? Ich werde ultra gebohrt, also wurde ich dachte, daß ich hallo kommen und sagen würde!

Is it Friday, thanks is God, how each today? I am bored ultra, therefore I became thought that I would come and say hello!

yeah no worries cy. >_<

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...