Jump to content
SAU Community

Recommended Posts

Have you all moved now Dan or is there more stuff to do?

I am here and all of my rc stuff is but the girl and all the stuff from the house is still up there. I will go back up there and pick her up and we will put all our stuff on a truck around the end of January. Hopefully wont have to work tomorrow night and will get to finally meet some of you. See you then

OMG OMG OMG i just went and made a coffee, and when i opened the fridge to get the milk out, to my delight there were bottles of glorious FULL CREAM MILK...*takes sip of coffee* ahhh yes much better :laugh:

P.s i also grabbed a rocky road :)

I am here and all of my rc stuff is but the girl and all the stuff from the house is still up there. I will go back up there and pick her up and we will put all our stuff on a truck around the end of January. Hopefully wont have to work tomorrow night and will get to finally meet some of you. See you then

tell me more about your rc gear.

Hi Guys!!!! *ghey lispy voice*

John,

Andrew has having phone troubles for the last couple of weeks multiple phone breakages etc heck i havent even been able to get in contact with him. I just got back from Mackay on a work trip Busy time of year! If you like mate I can give you my number and organise to meet you near the highway in Nerang this weekend?

Disclaimer: For those unfortunate to have a gay lispy voice I take responsibility for the above comments. If you dont like it blow me kindly & thankyou :laugh:

Hi Guys!!!! *ghey lispy voice*

Disclaimer: For those unfortunate to have a gay lispy voice I take responsibility for the above comments. If you dont like it blow me kindly & thankyou :laugh:

Don’t come to Noosa, we’re all too flamboyant here

Hi Guys!!!! *ghey lispy voice*

John,

Andrew has having phone troubles for the last couple of weeks multiple phone breakages etc heck i havent even been able to get in contact with him. I just got back from Mackay on a work trip Busy time of year! If you like mate I can give you my number and organise to meet you near the highway in Nerang this weekend?

meet half way (coomera bp) and i can grab the indicators from u there :laugh:

I like Noosa :laugh:

Nah seriously nice waves to be had up north on my plank...cant imagine I'll ever be strapping by 9' Mal to the roof of my skyline though! Good ol gf's car!

It’s been pretty crap, Sunday was ok but everyman and his dog was down at the National Park.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...