Jump to content
SAU Community

Recommended Posts

HOORAY! We should visit again soon... perhaps a Friday Night Coast Crooz is in order to eat steak with teh slidestar...

Considering I'LL BE DRIVING AND CAN'T GET IN TROUBLE ANYMORE. MUHAHAHAHHA!

hahahahaha yay

im easy though ill drive it up :P

Other than avoiding those with the fictional disease, there are a variety of ways to cure or prevent cooties. A "cootie shot" can be administered in a variety of ways. The most common is to draw two circles and two dots with a finger on one's arm, while saying the rhyme "Circle circle, dot dot, now you have a Cootie shot." This immunization is often followed by "Circle circle, square square, now you have it everywhere", which protects the entire body, and occasionally with "Circle circle, knife knife, now you have it all your life." Cootie shots can also be a punch to a shoulder.

lol

Dan the man is truly 'the' man of the moment.

My neighbours had a slight unfortunate problem with their plumbing last night... everyones' sewrage from our unit block of 6 was coming up their floor drains, and going all over their carpet. Dan turned off the water mains (I wasn't strong enough) so no one could continue to flood their house. Awwwww :P

la la land?

lol

nah dude just been busy with work/life .. how u been?

Awesome

organ failure and general discomfort from nerve pain

couldnt be better :P

have to laugh about it i guess

lo:(

hahaha

double :(

When times get hard, just remember Dave's fave saying when i'm around...

Everybody needs a bossom for a pillow... :P

Anna, I'll have to let you know...Marc is working back tonight, so he could be 30 mins or 5 hours :(

No worries miss!

UH-HUH, I AIN'T NO HOLLABACK GUUUR...

hi Karen...

So are we talking steak tonight or this fri??? did i miss something??

Tonight is Fasta Pasta. Stones Corner. Be there or i'll kick your nipples off.

YESSSS! I've wanted to use that for ages!

When times get hard, just remember Dave's fave saying when i'm around...

Everybody needs a bossom for a pillow... :P

No worries miss!

UH-HUH, I AIN'T NO HOLLABACK GUUUR...

your bossom is 100 kays away :(

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...