Jump to content
SAU Community

Recommended Posts

Just worked it out. It’s 117.69 each way, so over 6 days going both ways 1412.16 + the driving I need to do for my job.

So another 200 on top of that number give or take

stop killing penguins

hahah

nothing suss

ask him urself..

I just top the oil up in the swift… Siff service it

ahah wat is it a new swift or old ones..?

stop killing penguins

ask him urself..

ahah wat is it a new swift or old ones..?

It's a 1991, we blew the motor up once so put a 97 in it, which is starting to die in the ass as is the gearbox We should stop buying swifts and barinas eh, they just brake.

See the chillie movie for the 1st little ruckus box haha, we got something like 10 people in it that night!

I some how through the insides of the gearbox out the farking casing on that one too, poor car.

I some how through the insides of the gearbox out the farking casing on that one too, poor car.

Speaking braking box's, I havent had a good run.

pop'd my S13 one, my last R32's box, the box in dads old RUF, the swift/barina, pop'd the syncro's in my pajero too, reckon I should just stop thrashing cars eh

you mean "Anna on your back" right...

shhh im hunting anna's wabbits

Speaking braking box's, I havent had a good run.

pop'd my S13 one, my last R32's box, the box in dads old RUF, the swift/barina, pop'd the syncro's in my pajero too, reckon I should just stop thrashing cars eh

sounds to me u cant drive for shit :D

:rofl:

shhh im hunting anna's wabbits

sounds to me u cant drive for shit :D

:rofl:

I have a bad habit of flat changing way too often on stock box’s with BIG clutch’s + plus big rpm dumps and just generally being rough on them.

The Pajero I used to flog its tits off road, the swift/barina’s I have no excuses, im lazy I just treat them like crap

um, well pool and pontoon need to be starrted and finsihed, before we can build the house, and mum needs to finish the plans.

so it will be over 12 months before we move into it. (guessing)

Cya

but flating chaging in a fuel'd up Porsche at 8000rpm = both banks light up with flames out the pipes.

:rofl:

It's worth it, trust me

picsorban :D

Spots shane in the corner, *runs and hugs him* i missed you too

dude, wait until i atelast get my pants off...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...